Skip to product information
1 of 3

HARBAX HVAC & Refrigeration Compressor Oil | 3GS & 4GS Mineral Oil | 1 Gallon (3.78 L)

HARBAX HVAC & Refrigeration Compressor Oil | 3GS & 4GS Mineral Oil | 1 Gallon (3.78 L)

Regular price Dhs.40.00 AED
Regular price Sale price Dhs.40.00 AED
Sale Sold out
Shipping calculated at checkout.
Grade
Quantity

HARBAX HVAC & Refrigeration Compressor Oil is a mineral compressor oil, made in the UAE and sold in a 1 gallon (3.78 L) can in two viscosity grades: 3GS (32 cSt at 40 °C) and 4GS (46 cSt at 40 °C). Both grades suit reciprocating, rotary and screw compressors, and both are listed for R22, R12, R502, ammonia, isobutane and propane systems. If you service older HCFC or CFC equipment in the UAE, this is the kind of oil those compressors were designed for.

Why Choose HARBAX Mineral Compressor Oil?

  • Two grades, one brand: 3GS for lower-viscosity requirements and 4GS for a thicker oil film, so you can match the viscosity your compressor maker specifies.
  • Wide refrigerant list: The label lists CFC, HCFC, ammonia, isobutane and propane refrigerants, including R22 and R502.
  • Three compressor types: Suitable for reciprocating, rotary and screw compressors.
  • Dry oil: Water content is stated at 30 mg/kg on both grades.
  • Cold-flow data on the label: Pour point is -36 °C for 3GS and -30 °C for 4GS.
  • Made in the UAE: A local product in a 1 gallon can, handy for workshop and site servicing.

HARBAX 3GS and 4GS Specifications

Property HARBAX 3GS HARBAX 4GS
Oil type Mineral refrigeration compressor oil Mineral refrigeration compressor oil
Pack size 1 gallon (3.78 L) can 1 gallon (3.78 L) can
Density 0.850 kg/L at 29.5 °C 0.855 kg/L at 29.5 °C
Viscosity at 40 °C 32 cSt 46 cSt
Viscosity at 100 °C 5.5 cSt 7.0 cSt
Flash point 190 °C 200 °C
Pour point -36 °C -30 °C
Water content 30 mg/kg 30 mg/kg
Compressor types Reciprocating, rotary, screw Reciprocating, rotary, screw
Origin Made in UAE Made in UAE

Compatible Refrigerants

The refrigerants below are listed on the back label of each can.

Refrigerant group HARBAX 3GS can HARBAX 4GS can
CFC R11, R12, R13, R13B1, R113, R114, R500, R502, R503 R11, R12, R13, R13B1, R113, R114, R500, R502, R503
HCFC R22, R123, R124, R401a, R402a, R402b, R403b, R406a, R408a, R409a R22, R123, R124, R401a, R402a, R402b, R403b, R406a, R408a, R409a
Other refrigerants Ammonia: R717, Isobutane: R500a, Propane: R290 Ammonia: R717, Isobutane: R600a, Propane: R290

Important: this is a mineral oil. HFC refrigerants such as R134a, R404A, R407C, R410A and R32 are not on the compatibility list, so do not use this oil in those systems. They normally call for the synthetic oil the compressor maker specifies.

3GS or 4GS: How to Choose

Start with the compressor manufacturer's specification

Look at the compressor nameplate or manual for the required oil type and viscosity. If it asks for a 32 cSt mineral oil, choose 3GS. If it asks for a 46 cSt mineral oil, choose 4GS.

Think about operating conditions

3GS is the thinner oil, with a lower pour point of -36 °C. 4GS is thicker, with a higher flash point of 200 °C. Follow the compressor maker's recommendation rather than switching grades on your own.

Do not mix oil types

The label says not to mix with synthetic or incompatible oils. If a system was last serviced with a different oil type, check before you top up.

How to Use It

  • Follow the compressor manufacturer's recommended oil charge.
  • Make sure the system is clean before you add oil.
  • Do not mix with synthetic or incompatible oils.
  • Store in a cool, dry place and keep the container sealed.

Where to Use It: Applications

  • Servicing and topping up older R22 air conditioning and refrigeration systems
  • Commercial and industrial refrigeration plant
  • Residential HVAC systems that need mineral oil
  • Reciprocating, rotary and screw compressors
  • Ammonia, isobutane and propane systems where the compressor maker approves mineral oil

Why Buy HARBAX Compressor Oil from Angstrom in Dubai?

  • Dubai-based supplier of HVAC and refrigeration components, with delivery across the UAE.
  • Both grades in the same 1 gallon (3.78 L) can, so it is easy to pick the right one.
  • Technical data taken straight from the can label, so what you read here matches what you get.

HARBAX Refrigeration Compressor Oil FAQ

What is the difference between HARBAX 3GS and 4GS?

They are both mineral compressor oils. 3GS has a viscosity of 32 cSt at 40 °C and 4GS has 46 cSt at 40 °C. The 4GS grade also has a higher flash point (200 °C against 190 °C), and 3GS has a lower pour point (-36 °C against -30 °C).

Is HARBAX compressor oil a mineral or synthetic oil?

It is a mineral oil. Do not mix it with synthetic oils such as POE or PAG.

Can I use it with R134a, R410A or R32?

No. HFC refrigerants are not on the label's compatibility list. Use the oil your compressor manufacturer specifies for those systems.

Which refrigerants is it compatible with?

Both cans list CFC refrigerants (R11, R12, R13, R13B1, R113, R114, R500, R502, R503) and HCFC refrigerants (R22, R123, R124, R401a, R402a, R402b, R403b, R406a, R408a, R409a). Under other refrigerants, the 3GS can lists Ammonia: R717, Isobutane: R500a and Propane: R290. The 4GS can lists Ammonia: R717, Isobutane: R600a and Propane: R290.

Which compressors can it be used in?

Reciprocating, rotary and screw compressors.

How much oil is in one can?

Each can holds 1 gallon, which is 3.78 litres.

How should I store the oil?

Keep the can sealed in a cool, dry place.

View full details