HARBAX CleanFlow 48-DC Drier Core | D48 Filter Drier Core for Liquid Line Shells
HARBAX CleanFlow 48-DC Drier Core | D48 Filter Drier Core for Liquid Line Shells
Couldn't load pickup availability
Share
The HARBAX CleanFlow 48-DC (part number D48) is a universal replacement drier core with a 48 cubic inch desiccant volume, made for shell-type filter driers on HVAC and refrigeration systems. Its blend of molecular sieve and activated alumina gives high moisture and acid removal on liquid line and suction line installations, while keeping pressure drop low. It is a core only (some buyers search for it as a dryer core), so it goes inside a standard shell-type filter drier housing.
Why Choose the HARBAX CleanFlow 48-DC Drier Core?
- High moisture and acid removal: The core adsorbs the moisture and acid that would otherwise damage the system and shorten component life.
- 48 cubic inch desiccant volume: A large adsorption capacity for moisture and acid contaminants.
- Molecular sieve and activated alumina blend: A high-grade mix for chemical stability and filtration.
- Wide system coverage: For commercial, industrial and residential systems, on the liquid line or the suction line.
- Works with common refrigerants and oils: CFC, HCFC and HFC refrigerants, with mineral oil, alkylbenzene and POE lubricants.
- Sealed tin packing: The core is packed in a tin with a pull-ring lid, and it keeps its adsorption capacity while the tin stays sealed.
- CleanFlow design: Keeps refrigerant moving smoothly with low pressure drop.
HARBAX CleanFlow 48-DC Drier Core Specifications
| Specification | Detail |
|---|---|
| Brand | HARBAX |
| Series | CleanFlow |
| Model | CleanFlow 48-DC |
| Part number | D48 |
| Product type | Universal replacement filter drier core |
| Desiccant volume | 48 cubic inch (48 cu.in) |
| Desiccant blend | High-grade molecular sieve and activated alumina |
| Function | High moisture and acid removal |
| Installation | Liquid line and suction line |
| Systems | Commercial, industrial and residential |
| Fits | Standard shell-type filter drier housings |
| Refrigerants | CFC, HCFC and HFC |
| Lubricants | Mineral oil, alkylbenzene and POE |
| Flow | Low pressure drop, smooth refrigerant flow |
| Packaging | Sealed tin with pull-ring lid |
| Weight | 1 kg |
| Supplied as | Core only, housing (shell) sold separately |
Refrigerants and Lubricants
The 48-DC is made for use with CFC, HCFC and HFC refrigerants. It can be used in systems that run mineral oil, alkylbenzene or POE lubricants. Check your system's refrigerant and oil before you order.
How a Replaceable Drier Core Works
A take-apart filter drier has a shell with a removable cover and a core inside. Refrigerant flows through the core, which holds back moisture and acid. When the core is used up, you open the shell, fit a new core and close it again, instead of cutting out the whole drier.
Sealed Tin and Pull-Ring Lid
The core arrives in a sealed tin. While the tin stays sealed, the core keeps its adsorption capacity. Keep it sealed until you are ready to fit it. To open the tin, lift the pull ring, bend it back and pull the lid up.
When to Replace the Drier Core
Replace the core during major servicing, after contamination, and after a compressor failure. A core that has already taken up moisture and acid cannot protect the system once it is used up.
Check Before You Choose
This is a core, not a complete drier
The 48-DC only works inside a compatible shell-type filter drier housing. Sealed filter driers, which are replaced as a complete unit, do not take a replaceable core.
Match your shell
Check that your housing takes a 48 cubic inch core before you order. If you are unsure, check the shell's nameplate or the manufacturer's data.
Where to Use It: Applications
- Commercial, industrial and residential refrigeration and HVAC systems
- Shell-type filter driers on the liquid line or suction line
- Service work after contamination or a compressor change
Why Buy the HARBAX Drier Core from Angstrom in Dubai?
- Dubai-based supplier of HVAC and refrigeration components, with delivery across the UAE.
- Clear model and part numbers (CleanFlow 48-DC, D48), so you can match the core to your shell.
- Sold as a core only, so you pay for the part you are replacing.
HARBAX CleanFlow 48-DC Drier Core FAQ
What is a drier core?
It is the replaceable insert inside a take-apart filter drier, also called a dryer core. It removes moisture and acid from the refrigerant.
What does the HARBAX CleanFlow 48-DC do?
It removes moisture and acids from the refrigerant to protect compressors and system components.
What is the desiccant volume and what is it made of?
The desiccant volume is 48 cubic inches. The core is made of a high-grade blend of molecular sieve and activated alumina.
Which refrigerants and oils can I use it with?
It is made for CFC, HCFC and HFC refrigerants, and for systems with mineral oil, alkylbenzene or POE lubricants.
Can it go on the suction line as well as the liquid line?
Yes. The label lists liquid line and suction line installations in commercial, industrial and residential systems.
Is it a replacement core or a complete filter drier?
It is a replacement core for use inside a compatible shell-type filter drier. The shell is a separate item.
Can I use it in a sealed flare filter drier?
No. Sealed filter driers do not have a removable core. Replace those as a complete unit.
How long does the core keep its capacity in the tin?
While the tin stays sealed, the core keeps its adsorption capacity. Open the tin only when you are ready to fit the core.
Does it affect refrigerant flow?
No. The CleanFlow design is made for low pressure drop and smooth refrigerant circulation.
When should I replace the drier core?
During major servicing, after contamination, and after a compressor failure.



