DSZH WK-666 Tube Bender Kit | 90° Ratchet Bender & Cutter | 1/4" to 1/2"
DSZH WK-666 Tube Bender Kit | 90° Ratchet Bender & Cutter | 1/4" to 1/2"
Couldn't load pickup availability
Share
The DSZH WK-666 is a ratchet-type tube bender kit for bending small-diameter AC and refrigeration tube from 1/4" to 1/2" (5 to 12 mm) up to 90°. A mechanical ratchet and an ergonomic lever handle let you make a controlled bend with one hand. The kit includes aluminium bending wheels, a DSZH tube cutter and a blow-mold carry case, so the common small copper sizes are covered in one box.
Why Choose the DSZH WK-666 Tube Bender Kit?
- Mechanical ratchet action: The ratchet builds the bend in steps, so you can bend small tube quickly and with control.
- Covers 5 to 12 mm: The case is marked for 1/4", 5/16", 3/8", 1/2" and 5, 6, 8, 10, 12 mm O.D. tube.
- Bends up to 90°: The former carries a 0 to 90° scale, which helps you reach the angle you want.
- Quick positioning and return: Positioning blocks set the tube in place fast, and a quick return button resets the handle.
- Light, durable build: The body and bending wheels are made of aluminium alloy.
- Cutter included: A DSZH tube cutter in the case lets you cut and bend the tube with one kit.
- Carry case: Everything stores in a blue blow-mold case with red latches.
DSZH WK-666 Specifications
| Specification | DSZH WK-666 |
|---|---|
| Brand | DSZH |
| Model | WK-666 |
| Tool type | Manual ratchet-type tube bender kit (mechanical ratchet, one-hand lever handle) |
| Bend angle | Up to 90°, with a 0-90° scale on the bending former |
| Tube outside diameter (inch) | 1/4", 5/16", 3/8", 1/2" |
| Tube outside diameter (metric) | 5 mm, 6 mm, 8 mm, 10 mm, 12 mm |
| Bending wheels | Aluminium alloy wheels in several sizes |
| Body | Aluminium alloy body with ergonomic handle |
| Positioning | Quick tube positioning and quick return button |
| Also in the kit | DSZH tube cutter |
| Carry case | Blue blow-mold case with red latches, size range printed on the lid |
The size range and model come from the DSZH case label. Bend angle, features and materials come from the manufacturer's WK-666 listing and the kit photos.
What Is in the WK-666 Kit?
- Ratchet-type tube bender with lever handle and 0-90° bending former
- Aluminium bending wheels in several sizes for the tube diameters on the case label
- Tube positioning blocks with knurled knobs
- DSZH tube cutter
- Blue blow-mold carry case with red latches
How to Choose the Right Tube Size and Wheel
Measure the outside diameter
Check the O.D. of your tube. The kit is marked for 1/4", 5/16", 3/8" and 1/2", and for 5, 6, 8, 10 and 12 mm tube.
Match the wheel to the tube
Fit the bending wheel that matches the tube diameter and set the positioning block against the tube, so the tube sits snugly in the groove.
Use the right tube
The WK-666 is made for small-diameter tube. Use it on soft, annealed copper tube and keep within the sizes on the case label.
How to Bend Tube Without Kinking
Cut and deburr first
Cut the tube square with the cutter and remove the burr, so the tube seats properly in the wheel.
Seat the tube and bend in steps
Place the tube in the wheel groove, lock it with the positioning block and work the handle in steady strokes. The ratchet holds the bend between strokes.
Watch the angle scale
Follow the 0-90° scale on the former and stop at your angle. Do not push past 90°, and never force a tube that is not seated in the groove.
Release with the return button
Press the quick return button to reset the handle, then lift the bent tube out.
Where to Use It: Applications
- AC installation and refrigeration copper pipework
- Bending small-diameter copper tube in tight spaces
- Service, repair and replacement work
- Workshop and site use
Why Buy the DSZH WK-666 from Angstrom in Dubai?
- Dubai-based supplier of HVAC and refrigeration tools, with delivery across the UAE.
- DSZH brand kit with the size range printed on the case.
- Bender, wheels and tube cutter in a single carry case.
DSZH WK-666 Tube Bender FAQ
What tube sizes does the WK-666 bend?
It is made for 1/4", 5/16", 3/8" and 1/2" O.D. tube, and for 5, 6, 8, 10 and 12 mm, as printed on the case label.
What angle can it bend?
It bends up to 90°. It is not a 180° bender.
Can I bend copper tube for AC and refrigeration with it?
Yes. Small-diameter soft copper tube is its main use, in AC installation and refrigeration pipework.
Can it bend aluminium tube?
The case and the manufacturer's listing give the tube sizes but do not list aluminium, so we recommend it for soft copper tube within the marked sizes.
What type of bender is it?
It is a manual ratchet-type lever bender. You work the handle by hand and the ratchet builds the bend in steps.
How do I bend without kinking the tube?
Use the wheel that matches the tube diameter, seat the tube fully in the groove, lock it with the positioning block and bend in steady strokes. Stop at the angle you need.
What is in the kit?
The kit holds the ratchet bender, aluminium bending wheels, positioning blocks, a DSZH tube cutter and the blow-mold carry case.
Which brand is the WK-666?
It is a DSZH kit, and the DSZH name, model WK-666 and size range are printed on the case label.

