Skip to product information
1 of 2

DSZH CT-526-F Grabber Flaring Tool | 3/16" to 3/4" (5-19 mm) | AC & HVAC

DSZH CT-526-F Grabber Flaring Tool | 3/16" to 3/4" (5-19 mm) | AC & HVAC

Regular price Dhs.55.00 AED
Regular price Sale price Dhs.55.00 AED
Sale Sold out
Shipping calculated at checkout.
Quantity

The DSZH CT-526-F is a manual grabber-type flaring tool that makes 45° flares on copper tube from 3/16" to 3/4" (5 mm to 19 mm) outside diameter. One adjustable clamp holds every size in that range, so you do not need a separate block for each tube. It suits AC installation, refrigeration pipework and service work, where a clean flare gives a tight joint with a flare nut. It has a cone head, an integrated clamping block and a thickened yoke, and it works by hand.

Why Choose the DSZH CT-526-F Flaring Tool?

  • One tool, 3/16" to 3/4": The adjustable grabber clamp covers the whole inch range without changing parts.
  • Inch and metric: The card lists 3/16" to 3/4" and 5 mm to 19 mm, so metric and inch copper tube both work.
  • Cone flaring head: The cone forms the tube end into a flare for a leak-tight flare connection.
  • Integrated clamping block: The clamp and block are built into one piece, which keeps the tube firmly in place.
  • Thickened yoke: A heavier yoke is made for repeated use on site and in the workshop.
  • Larger range than the CT-525-F: The CT-526-F goes up to 3/4", where the CT-525-F stops at 5/8".

DSZH CT-526-F Specifications

Specification DSZH CT-526-F
Brand DSZH
Model CT-526-F
Tool type Manual grabber-type flaring tool
Tube outside diameter (inch) 3/16" to 3/4"
Tube outside diameter (metric) 5 mm to 19 mm
Tube material Copper tubing
Flare angle 45°
Tube holding Adjustable grabber clamp with integrated block, one tool for the whole size range
Flaring head Cone flaring head
Frame Thickened yoke
Operation Hand-operated, no power needed
Supplied One tool on a display card

The size range is printed on the DSZH packaging. The model data comes from the manufacturer's range, and the flare angle from distributors of the tool.

How to Make a Good Flare with the CT-526-F

Prepare the tube

Cut the copper tube square and remove the burr from the inside and outside of the cut end. Slide the flare nut onto the tube first, with the thread facing the end, because it cannot be added after the flare is made.

Clamp the tube

Open the adjustable clamp, place the tube in it and tighten it so the tube cannot slip. Set the end of the tube at the height the flare needs.

Form the flare

Put a drop of oil on the cone, fit the yoke over the clamp, centre the cone on the tube and turn the handle to press the flare. Stop when the flare is formed, release the clamp and look for an even, crack-free flare before you tighten the nut.

Where to Use It: Applications

  • Flare connections on AC refrigerant lines
  • Refrigeration copper pipework
  • Copper tube flaring in HVAC installation and maintenance
  • Workshop and site use with inch or metric tube

Why Buy the DSZH CT-526-F from Angstrom in Dubai?

  • Dubai-based supplier of HVAC and refrigeration tools, with delivery across the UAE.
  • DSZH tool, supplied on the manufacturer's own display card.
  • One flaring tool for every common AC and refrigeration copper tube size from 3/16" to 3/4".

DSZH CT-526-F Flaring Tool FAQ

Which tube sizes does the CT-526-F cover?

It covers 3/16" to 3/4" and 5 mm to 19 mm outside diameter, as printed on the packaging.

Is it for inch tube or metric tube?

Both. The adjustable clamp holds any diameter in the range, so 3/16" (about 4.8 mm) to 3/4" (about 19 mm) tube are covered, and metric sizes from 5 mm to 19 mm.

Can I use it on copper tube?

Yes. DSZH and its distributors describe it for copper tubing, which is the standard tube for AC and refrigeration work.

Does it make a 45° SAE flare?

Yes. Distributors list the tool as a 45° flaring tool, which is the flare angle used for standard SAE flare fittings on HVAC and refrigeration lines.

What does grabber type mean?

A grabber-type tool holds the tube in an adjustable clamp that grips and centres tubes of different sizes, instead of a fixed block with a separate hole for each size.

Is it an eccentric or a ratchet flaring tool?

No. It is a standard cone-and-yoke grabber tool that you turn by hand. DSZH does not list an eccentric cone or a ratchet drive for this model.

How do I get a leak-free flare?

Cut the tube square, remove the burr, fit the nut first, clamp the tube firmly, oil the cone and turn the handle steadily. Check that the flare is even and free of cracks.

What is the difference between the CT-525-F and the CT-526-F?

The CT-525-F covers 3/16" to 5/8", and the CT-526-F extends the range to 3/4".

View full details