Krystal Copper Elbow 90° | AC & Refrigeration Copper Fitting | 3/8" to 1-1/8"
Krystal Copper Elbow 90° | AC & Refrigeration Copper Fitting | 3/8" to 1-1/8"
Couldn't load pickup availability
Share
Need a copper elbow in the UAE? This Krystal 90° copper elbow is one of our AC copper fittings and refrigeration copper fittings, used to turn a copper pipe run through a right angle. It is made of high-grade copper, joins to the pipe by brazing, and comes in 15 sizes from 3/8" to 4-1/8", so one range covers small split-unit lines and large commercial headers.
Why Choose the Krystal Copper Elbow 90°?
- Right-angle turn in one fitting: The 90° bend lets you change direction cleanly around walls, equipment and structure, without bending the pipe by hand.
- Copper to match copper pipe: The fitting is the same metal as the tube, which suits brazed refrigerant lines.
- Brazed connection: Made for brazing, the standard way to join copper refrigerant pipework.
- One range, many line sizes: Fifteen sizes with model numbers, so you can match the fitting to the pipe you are installing and reorder the exact part later.
Specifications
- Product: Copper elbow, 90 degree
- Brand: Krystal
- Material: High-grade copper
- Angle: 90°
- Connection type: Brazed
- Sizes: 3/8" to 4-1/8" (15 sizes, listed in the table below)
- Model numbers: KCF0303 to KCF0319, by size
Copper Elbow Sizes and Model Numbers
Each elbow is sized by the copper pipe it connects to. The pipe outer diameter in millimetres is the standard conversion of the inch size.
| Size (inch) | Copper pipe OD (mm) | Model no. | Angle |
|---|---|---|---|
| 3/8" | 9.52 | KCF0303 | 90° |
| 1/2" | 12.7 | KCF0304 | 90° |
| 5/8" | 15.88 | KCF0305 | 90° |
| 3/4" | 19.05 | KCF0306 | 90° |
| 7/8" | 22.22 | KCF0307 | 90° |
| 1" | 25.4 | KCF0308 | 90° |
| 1-1/8" | 28.58 | KCF0309 | 90° |
| 1-1/4" | 31.75 | KCF0310 | 90° |
| 1-3/8" | 34.92 | KCF0311 | 90° |
| 1-1/2" | 38.1 | KCF0312 | 90° |
| 1-5/8" | 41.28 | KCF0313 | 90° |
| 1-3/4" | 44.45 | KCF0314 | 90° |
| 2-1/8" | 53.98 | KCF0315 | 90° |
| 3-1/8" | 79.38 | KCF0317 | 90° |
| 4-1/8" | 104.78 | KCF0319 | 90° |
How to Choose and Install a Copper Elbow
Match the size to the pipe
Choose the elbow with the same nominal size as the copper pipe you are joining. A 3/4" elbow goes on 3/4" pipe, and so on. The size is the pipe diameter, not the fitting's own outside diameter.
Braze with care
Cut the pipe square, remove burrs, clean the pipe end and the fitting socket, and fit the pipe fully into the socket before heating. Heat the joint evenly and let the brazing alloy flow into the gap. For refrigerant lines, it is common practice to flow nitrogen through the pipe while brazing to limit oxide build-up inside the tube. Follow the equipment manufacturer's installation instructions and your site's procedures.
Plan the route
Use as few elbows as the layout allows, because every bend adds some resistance to refrigerant flow. Where the run is long, check the line sizes and any extra fittings against the system designer's requirements.
Where to Use 90° Copper Elbows: Applications
- Residential split and ductless AC refrigerant lines
- Commercial HVAC and VRF/VRV piping
- Refrigeration units, display chillers and cold rooms
- Industrial refrigeration pipework
- Repair and replacement of existing copper refrigerant lines
Why Buy a Copper Elbow 90 Degree in Dubai from Angstrom?
- Dubai-based supplier of copper elbow 90 degree fittings and other HVAC components, with delivery across the UAE.
- Krystal copper fittings and Krystal copper coil from one supplier, so pipe and fittings match.
- Clear model numbers and sizes, which makes it easy to specify the right fitting on a quotation or job list.
Copper Elbow FAQ
What is a 90 degree copper elbow used for?
It changes the direction of a copper pipe run by 90 degrees. In AC and refrigeration systems it routes refrigerant lines around obstacles and into equipment connections.
How is the Krystal copper elbow connected to the pipe?
By brazing. The pipe slides into the fitting and the joint is sealed with brazing alloy.
What sizes does the Krystal copper elbow 90° come in?
The range covers 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8", 1-3/4", 2-1/8", 3-1/8" and 4-1/8". The table above gives the pipe diameter and model number for each.
Does the elbow size refer to the pipe or to the fitting?
It refers to the copper pipe the elbow is made for. For example, a 5/8" elbow is for 5/8" copper pipe.
Can I use these fittings with Krystal copper coil?
Yes. Choose the elbow in the same nominal size as the coil you are installing, for example a 3/8" elbow with 3/8" coil.
Do you deliver copper fittings across the UAE?
Yes. We are based in Dubai and deliver copper elbows and other fittings across the UAE.




