Skip to product information
1 of 1

Krystal Copper Coupling | AC & Refrigeration Copper Fitting | 1/2" to 1-1/8"

Krystal Copper Coupling | AC & Refrigeration Copper Fitting | 1/2" to 1-1/8"

Regular price Dhs.0.65 AED
Regular price Sale price Dhs.0.65 AED
Sale Sold out
Shipping calculated at checkout.
Size
Quantity

What is a copper coupling? It is the straight fitting that joins two lengths of copper pipe of the same size. This Krystal copper coupling UAE range is made of high-grade copper for brazed refrigerant lines in AC and refrigeration systems, and it covers nine pipe sizes from 1/2" to 4-1/8", each with its own model number.

Why Choose the Krystal Copper Coupling?

  • Straight, in-line joint: Lets you connect two pipe ends or repair a cut or damaged section of refrigerant line.
  • Same material as the pipe: Copper fitting on copper tube, which is what brazed refrigerant pipework is built around.
  • Made for brazing: The socket ends take the pipe and are sealed with brazing alloy.
  • Nine sizes with model numbers: Easy to match to the pipe on site and to list on a quotation or purchase order.

Specifications

  • Product: Copper coupling (straight, pipe to pipe)
  • Brand: Krystal
  • Material: High-grade copper
  • Connection type: Brazed
  • Sizes: 1/2" to 4-1/8" (nine sizes, listed in the table below)
  • Model numbers: KCF1104 to KCF1116, by size
  • Used in: HVAC and refrigeration copper piping

Copper Coupling Sizes and Model Numbers

A coupling is sized by the copper pipe it joins. The pipe outer diameter in millimetres is the standard conversion of the inch size.

Size (inch) Copper pipe OD (mm) Model no.
1/2" 12.7 KCF1104
5/8" 15.88 KCF1105
3/4" 19.05 KCF1106
7/8" 22.22 KCF1107
1-1/8" 28.58 KCF1109
1-3/8" 34.92 KCF1110
2-1/8" 53.98 KCF1112
3-1/8" 79.38 KCF1114
4-1/8" 104.78 KCF1116

How to Choose and Install a Copper Coupling

Match the coupling to the pipe

Pick the coupling with the same nominal size as the copper pipe. A 3/4" coupling joins 3/4" pipe. If you are joining two different pipe sizes, you need a reducing fitting instead of a standard coupling.

Prepare the joint

Cut the pipe square and remove the burrs inside and out. Clean the pipe end and the inside of the coupling until they are bright, so the brazing alloy can wet the surfaces. Push the pipe fully into the socket so it reaches the stop.

Braze and check

Heat the joint evenly and let the brazing alloy flow around the gap. On refrigerant lines it is common practice to purge the pipe with nitrogen while brazing to limit oxide forming inside the tube. Let the joint cool, then pressure and leak test the line as your equipment manufacturer or site procedure requires.

Where to Use Copper Couplings: Applications

  • Residential split and ductless AC refrigerant lines
  • Commercial HVAC piping networks
  • Cold rooms, chillers and refrigeration units
  • Industrial refrigeration lines
  • Extending or repairing existing copper pipework

Copper Coupling Dubai: Why Buy from Angstrom?

  • Dubai-based supplier of copper coupling UAE jobs and other AC copper fittings, with delivery across the UAE.
  • Krystal couplings, elbows and copper coil from one supplier, so pipe and fittings match.
  • Model numbers and sizes listed clearly, so the right coupling goes on the job list the first time.

Copper Coupling FAQ

What is a copper coupling used for?

It joins two pieces of copper pipe in a straight line. In AC and refrigeration systems it connects pipe lengths and repairs damaged sections of refrigerant line.

How is a Krystal copper coupling fitted?

By brazing. Both pipe ends go into the coupling and the joints are sealed with brazing alloy.

What sizes does the Krystal copper coupling come in?

The range covers 1/2", 5/8", 3/4", 7/8", 1-1/8", 1-3/8", 2-1/8", 3-1/8" and 4-1/8". The table above gives the pipe diameter and model number for each.

Are these refrigeration copper fittings suitable for AC systems?

Yes. They are made for HVAC and refrigeration copper piping, including split AC, commercial HVAC and cold room lines.

Can I join two different pipe sizes with a coupling?

No. A standard coupling joins two pipes of the same size. Joining different sizes needs a reducer or other reducing fitting.

Do you deliver copper couplings in Dubai and across the UAE?

Yes. We are based in Dubai and deliver across the UAE.

View full details