{"product_id":"harbax-automatic-pressure-switch-low-high-dual","title":"HARBAX Automatic Pressure Switch | Low, High \u0026 Dual | HVAC \u0026 Refrigeration","description":"\u003cp\u003e\u003cstrong\u003eThe HARBAX automatic pressure switch comes in three versions for refrigeration and air conditioning: Low Pressure (HDPS1A), High Pressure (HDPS5A) and Dual Pressure (HDPS15A).\u003c\/strong\u003e The low model covers -0.2 to 7.5 bar, the high model covers 8 to 32 bar, and the dual model puts both a low-side range and a high-side cut-out scale in one housing. Every version has 1\/4\" brass flare connections, a scale you can read through the front window and automatic reset.\u003c\/p\u003e\n\u003ch2\u003eLow, High or Dual: Which HARBAX Pressure Switch Do You Need?\u003c\/h2\u003e\n\u003ch3\u003eLow Pressure (HDPS1A)\u003c\/h3\u003e\n\u003cp\u003eChoose this model to watch the low side of a system. Its range runs from -0.2 to 7.5 bar (-3 to 109 psig), with a differential scale of 0.7 to 4 bar.\u003c\/p\u003e\n\u003ch3\u003eHigh Pressure (HDPS5A)\u003c\/h3\u003e\n\u003cp\u003eChoose this model to watch the high side. Its range runs from 8 to 32 bar (100 to 465 psig), with a differential scale of 2 to 6 bar.\u003c\/p\u003e\n\u003ch3\u003eDual Pressure (HDPS15A)\u003c\/h3\u003e\n\u003cp\u003eChoose this model when one unit should watch both sides. The left window has the low-side range and differential scales, and the right window has the high-side CUT OUT scale from 8 to 32 bar. It has two 1\/4\" flare connections, one for each side.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose a HARBAX Automatic Pressure Switch?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree versions, one family:\u003c\/strong\u003e Pick low, high or dual control for compressors, condensers and other refrigeration equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear window scales:\u003c\/strong\u003e Range and differential are printed in both bar and psi (psig for range), so the setting can be read at a glance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic reset:\u003c\/strong\u003e The switch resets by itself once pressure returns inside the set limits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4\" brass flare connection:\u003c\/strong\u003e Matches the common service-port flare fitting on HVAC and refrigeration lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate range and differential adjustment:\u003c\/strong\u003e Each is set with its own screw, with a lock plate to hold the setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting hardware in the kit photos:\u003c\/strong\u003e A galvanised mounting bracket, a cover plate and screws in a bag are shown with the switches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHARBAX Pressure Switch Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eLow Pressure (HDPS1A)\u003c\/th\u003e\n\u003cth\u003eHigh Pressure (HDPS5A)\u003c\/th\u003e\n\u003cth\u003eDual Pressure (HDPS15A)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHARBAX\u003c\/td\u003e\n\u003ctd\u003eHARBAX\u003c\/td\u003e\n\u003ctd\u003eHARBAX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure sides\u003c\/td\u003e\n\u003ctd\u003eLow side only\u003c\/td\u003e\n\u003ctd\u003eHigh side only\u003c\/td\u003e\n\u003ctd\u003eLow side and high side in one housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustable range\u003c\/td\u003e\n\u003ctd\u003e-0.2 to 7.5 bar (-3 to 109 psig)\u003c\/td\u003e\n\u003ctd\u003e8 to 32 bar (100 to 465 psig)\u003c\/td\u003e\n\u003ctd\u003eLow side: -0.2 to 7.5 bar (-3 to 109 psig)\u003cbr\u003eHigh side cut-out: 8 to 32 bar (100 to 465 psig)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDifferential scale\u003c\/td\u003e\n\u003ctd\u003e0.7 to 4 bar (10 to 55 psi)\u003c\/td\u003e\n\u003ctd\u003e2 to 6 bar (35 to 85 psi)\u003c\/td\u003e\n\u003ctd\u003eLow side: 0.7 to 4 bar (10 to 55 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure connection\u003c\/td\u003e\n\u003ctd\u003eOne 1\/4\" SAE flare, brass\u003c\/td\u003e\n\u003ctd\u003eOne 1\/4\" SAE flare, brass\u003c\/td\u003e\n\u003ctd\u003eTwo 1\/4\" flare, brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFaceplate\u003c\/td\u003e\n\u003ctd\u003eSINGLE PRESSURE SWITCH, CE mark\u003c\/td\u003e\n\u003ctd\u003eSINGLE PRESSURE SWITCH, CE mark\u003c\/td\u003e\n\u003ctd\u003eDUAL PRESSURE SWITCH, CE mark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting parts shown in kit photos\u003c\/td\u003e\n\u003ctd\u003eBracket, cover plate, screws\u003c\/td\u003e\n\u003ctd\u003eBracket, cover plate, screws\u003c\/td\u003e\n\u003ctd\u003eBracket, cover plate, screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe readings above come from the scales printed on each switch.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eManual data (HDPS1 and HDPS5)\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch type\u003c\/td\u003e\n\u003ctd\u003eSPDT changeover switch; terminals 1-2 open as pressure rises\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReset\u003c\/td\u003e\n\u003ctd\u003eAutomatic reset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum working pressure (PS\/MWP)\u003c\/td\u003e\n\u003ctd\u003eHDPS1: 245 psig \/ 17 bar\u003cbr\u003eHDPS5: 510 psig \/ 35 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection thread\u003c\/td\u003e\n\u003ctd\u003e7\/16-20 UNF (1\/4\" SAE flare)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-40 to 65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad rating, AC 240 V\u003c\/td\u003e\n\u003ctd\u003e8 A full load, 48 A locked rotor, 3 A pilot duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad rating, AC 120 V\u003c\/td\u003e\n\u003ctd\u003e16 A full load, 96 A locked rotor, 3 A pilot duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad rating, DC 240 V\u003c\/td\u003e\n\u003ctd\u003e12 W pilot duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating basis\u003c\/td\u003e\n\u003ctd\u003eUL and CE regulations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBellows and base\u003c\/td\u003e\n\u003ctd\u003ePhosphor copper bellows with brass base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003eCopper wire only, terminal tightening torque 20 lb.in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe wiring, load, reset and temperature figures in the second table come from the HARBAX single pressure switch manual, which covers the HDPS1 and HDPS5 models. The dual model has its own faceplate scales, shown in the first table.\u003c\/p\u003e\n\u003ch2\u003eAdjusting Range and Differential\u003c\/h2\u003e\n\u003ch3\u003eSet the range\u003c\/h3\u003e\n\u003cp\u003eThe RANGE scale shows the main pressure setting. Turn the range screw to move the marker along the scale. On the dual model, the high side uses the CUT OUT scale in the right-hand window.\u003c\/p\u003e\n\u003ch3\u003eSet the differential\u003c\/h3\u003e\n\u003cp\u003eThe DIFF scale shows the gap between the pressure where the switch operates and the pressure where it resets. It has its own adjusting screw.\u003c\/p\u003e\n\u003ch3\u003eRemove and refit the lock plate\u003c\/h3\u003e\n\u003cp\u003eTake off the lock plate before changing any setting, and fit it again afterwards so the setting stays put. After setting, confirm the switching points against your system's design pressures with a gauge.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh and low pressure control in refrigeration equipment\u003c\/li\u003e\n\u003cli\u003eAir conditioning and refrigeration systems\u003c\/li\u003e\n\u003cli\u003eCondensing unit and compressor protection\u003c\/li\u003e\n\u003cli\u003eAir pressure control in automation systems\u003c\/li\u003e\n\u003cli\u003eReplacement of an existing 1\/4\" flare pressure switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy HARBAX Pressure Switches from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of HVAC and refrigeration components, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eLow, high and dual models on one page, with the model numbers HDPS1A, HDPS5A and HDPS15A shown clearly.\u003c\/li\u003e\n\u003cli\u003eFull pressure ranges and connection details listed, so you can match the switch to your system before you order.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHARBAX Pressure Switch FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between a low, high and dual pressure switch?\u003c\/h3\u003e\n\u003cp\u003eA low pressure switch watches the low side of the system, a high pressure switch watches the high side, and a dual pressure switch combines both in one housing with two connections.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure ranges do the HARBAX switches cover?\u003c\/h3\u003e\n\u003cp\u003eThe low model covers -0.2 to 7.5 bar (-3 to 109 psig). The high model covers 8 to 32 bar (100 to 465 psig). The dual model has the low-side range plus a high-side cut-out scale of 8 to 32 bar.\u003c\/p\u003e\n\u003ch3\u003eDo these switches reset automatically?\u003c\/h3\u003e\n\u003cp\u003eYes. They are automatic-reset switches, so they reset on their own when pressure returns to the set level.\u003c\/p\u003e\n\u003ch3\u003eWhat is the differential, and how do I set it?\u003c\/h3\u003e\n\u003cp\u003eThe differential is the pressure gap between switching off and switching back on. The low switch offers 0.7 to 4 bar and the high switch offers 2 to 6 bar. Set it with the differential screw after removing the lock plate, then refit the plate.\u003c\/p\u003e\n\u003ch3\u003eWhat connection do they have?\u003c\/h3\u003e\n\u003cp\u003eThe low and high models have one 1\/4\" SAE flare connection (7\/16-20 UNF thread). The dual model has two 1\/4\" flare connections.\u003c\/p\u003e\n\u003ch3\u003eWhich refrigerants and media can I use?\u003c\/h3\u003e\n\u003cp\u003eThe standard models are made for Freon-type refrigerants, air and other non-corrosive media, with phosphor copper bellows and a brass base. Ammonia needs a stainless steel version, so these brass models are not for ammonia systems.\u003c\/p\u003e\n\u003ch3\u003eWhat temperature range and electrical rating apply?\u003c\/h3\u003e\n\u003cp\u003eThe manual gives -40 to 65 °C and a rating of 8 A full load at AC 240 V and 16 A at AC 120 V for the single models. It also lists 3 A pilot duty on AC and 12 W on DC 240 V. Wire with copper only.\u003c\/p\u003e\n\u003ch3\u003eWhat maximum pressure can the single models take?\u003c\/h3\u003e\n\u003cp\u003eThe manual lists 245 psig (17 bar) for HDPS1 and 510 psig (35 bar) for HDPS5.\u003c\/p\u003e","brand":"HARBAX","offers":[{"title":"Low Pressure","offer_id":68485731975279,"sku":"PS-HARB-HDPS-1-A","price":55.0,"currency_code":"AED","in_stock":true},{"title":"High Pressure","offer_id":68485732008047,"sku":"PS-HARB-HDPS-5-A","price":60.0,"currency_code":"AED","in_stock":true},{"title":"Dual Pressure (High\/Low)","offer_id":68485732040815,"sku":"PS-HARB-HDPS-15-A","price":75.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/harbax-dual-pressure-switch-hdps15a-front.jpg?v=1795054246","url":"https:\/\/www.angstromtrading.com\/products\/harbax-automatic-pressure-switch-low-high-dual","provider":"Angstrom Building Materials Trading LLC","version":"1.0","type":"link"}