{"product_id":"dszh-ct-526-f-grabber-flaring-tool","title":"DSZH CT-526-F Grabber Flaring Tool | 3\/16\" to 3\/4\" (5-19 mm) | AC \u0026 HVAC","description":"\u003cp\u003e\u003cstrong\u003eThe DSZH CT-526-F is a manual grabber-type flaring tool that makes 45° flares on copper tube from 3\/16\" to 3\/4\" (5 mm to 19 mm) outside diameter.\u003c\/strong\u003e One adjustable clamp holds every size in that range, so you do not need a separate block for each tube. It suits AC installation, refrigeration pipework and service work, where a clean flare gives a tight joint with a flare nut. It has a cone head, an integrated clamping block and a thickened yoke, and it works by hand.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose the DSZH CT-526-F Flaring Tool?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne tool, 3\/16\" to 3\/4\":\u003c\/strong\u003e The adjustable grabber clamp covers the whole inch range without changing parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInch and metric:\u003c\/strong\u003e The card lists 3\/16\" to 3\/4\" and 5 mm to 19 mm, so metric and inch copper tube both work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone flaring head:\u003c\/strong\u003e The cone forms the tube end into a flare for a leak-tight flare connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated clamping block:\u003c\/strong\u003e The clamp and block are built into one piece, which keeps the tube firmly in place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickened yoke:\u003c\/strong\u003e A heavier yoke is made for repeated use on site and in the workshop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarger range than the CT-525-F:\u003c\/strong\u003e The CT-526-F goes up to 3\/4\", where the CT-525-F stops at 5\/8\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDSZH CT-526-F Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDSZH CT-526-F\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDSZH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCT-526-F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool type\u003c\/td\u003e\n\u003ctd\u003eManual grabber-type flaring tool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube outside diameter (inch)\u003c\/td\u003e\n\u003ctd\u003e3\/16\" to 3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube outside diameter (metric)\u003c\/td\u003e\n\u003ctd\u003e5 mm to 19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube material\u003c\/td\u003e\n\u003ctd\u003eCopper tubing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlare angle\u003c\/td\u003e\n\u003ctd\u003e45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube holding\u003c\/td\u003e\n\u003ctd\u003eAdjustable grabber clamp with integrated block, one tool for the whole size range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlaring head\u003c\/td\u003e\n\u003ctd\u003eCone flaring head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eThickened yoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation\u003c\/td\u003e\n\u003ctd\u003eHand-operated, no power needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied\u003c\/td\u003e\n\u003ctd\u003eOne tool on a display card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe size range is printed on the DSZH packaging. The model data comes from the manufacturer's range, and the flare angle from distributors of the tool.\u003c\/p\u003e\n\u003ch2\u003eHow to Make a Good Flare with the CT-526-F\u003c\/h2\u003e\n\u003ch3\u003ePrepare the tube\u003c\/h3\u003e\n\u003cp\u003eCut the copper tube square and remove the burr from the inside and outside of the cut end. Slide the flare nut onto the tube first, with the thread facing the end, because it cannot be added after the flare is made.\u003c\/p\u003e\n\u003ch3\u003eClamp the tube\u003c\/h3\u003e\n\u003cp\u003eOpen the adjustable clamp, place the tube in it and tighten it so the tube cannot slip. Set the end of the tube at the height the flare needs.\u003c\/p\u003e\n\u003ch3\u003eForm the flare\u003c\/h3\u003e\n\u003cp\u003ePut a drop of oil on the cone, fit the yoke over the clamp, centre the cone on the tube and turn the handle to press the flare. Stop when the flare is formed, release the clamp and look for an even, crack-free flare before you tighten the nut.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFlare connections on AC refrigerant lines\u003c\/li\u003e\n\u003cli\u003eRefrigeration copper pipework\u003c\/li\u003e\n\u003cli\u003eCopper tube flaring in HVAC installation and maintenance\u003c\/li\u003e\n\u003cli\u003eWorkshop and site use with inch or metric tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy the DSZH CT-526-F from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of HVAC and refrigeration tools, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eDSZH tool, supplied on the manufacturer's own display card.\u003c\/li\u003e\n\u003cli\u003eOne flaring tool for every common AC and refrigeration copper tube size from 3\/16\" to 3\/4\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDSZH CT-526-F Flaring Tool FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich tube sizes does the CT-526-F cover?\u003c\/h3\u003e\n\u003cp\u003eIt covers 3\/16\" to 3\/4\" and 5 mm to 19 mm outside diameter, as printed on the packaging.\u003c\/p\u003e\n\u003ch3\u003eIs it for inch tube or metric tube?\u003c\/h3\u003e\n\u003cp\u003eBoth. The adjustable clamp holds any diameter in the range, so 3\/16\" (about 4.8 mm) to 3\/4\" (about 19 mm) tube are covered, and metric sizes from 5 mm to 19 mm.\u003c\/p\u003e\n\u003ch3\u003eCan I use it on copper tube?\u003c\/h3\u003e\n\u003cp\u003eYes. DSZH and its distributors describe it for copper tubing, which is the standard tube for AC and refrigeration work.\u003c\/p\u003e\n\u003ch3\u003eDoes it make a 45° SAE flare?\u003c\/h3\u003e\n\u003cp\u003eYes. Distributors list the tool as a 45° flaring tool, which is the flare angle used for standard SAE flare fittings on HVAC and refrigeration lines.\u003c\/p\u003e\n\u003ch3\u003eWhat does grabber type mean?\u003c\/h3\u003e\n\u003cp\u003eA grabber-type tool holds the tube in an adjustable clamp that grips and centres tubes of different sizes, instead of a fixed block with a separate hole for each size.\u003c\/p\u003e\n\u003ch3\u003eIs it an eccentric or a ratchet flaring tool?\u003c\/h3\u003e\n\u003cp\u003eNo. It is a standard cone-and-yoke grabber tool that you turn by hand. DSZH does not list an eccentric cone or a ratchet drive for this model.\u003c\/p\u003e\n\u003ch3\u003eHow do I get a leak-free flare?\u003c\/h3\u003e\n\u003cp\u003eCut the tube square, remove the burr, fit the nut first, clamp the tube firmly, oil the cone and turn the handle steadily. Check that the flare is even and free of cracks.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the CT-525-F and the CT-526-F?\u003c\/h3\u003e\n\u003cp\u003eThe CT-525-F covers 3\/16\" to 5\/8\", and the CT-526-F extends the range to 3\/4\".\u003c\/p\u003e","brand":"DSZH","offers":[{"title":"Default Title","offer_id":68486791987311,"sku":"FLARE-DSZH-526","price":55.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/dszh-ct-526-f-grabber-flaring-tool-handle-left.jpg?v=1795055739","url":"https:\/\/www.angstromtrading.com\/products\/dszh-ct-526-f-grabber-flaring-tool","provider":"Angstrom Building Materials Trading LLC","version":"1.0","type":"link"}