{"product_id":"capillary-hose-1m-straight-elbow-90","title":"GOMAX Quadra DN2 Capillary Hose 1 m | Straight x 90° Elbow 1\/4\" Flare | AC \u0026 Refrigeration","description":"\u003cp\u003e\u003cstrong\u003eLooking for a capillary hose that turns a corner?\u003c\/strong\u003e This 1 m GOMAX Quadra DN2 hose comes already assembled with a straight 1\/4\" SAE flare (7\/16-20 UNF) female brass fitting on one end and a 90° elbow fitting on the other. The elbow lets the hose leave a port at a right angle, which helps when a gauge, pressure switch or service port sits close to a panel or another component.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose the 1 m Straight x 90° Elbow Capillary Hose?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-angle exit:\u003c\/strong\u003e The 90° elbow end avoids a sharp bend in the hose right at the fitting, which protects the hose in tight spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight end where you need it:\u003c\/strong\u003e The other end is a standard straight fitting, so one hose covers a port that faces forward and one that faces sideways.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlready assembled:\u003c\/strong\u003e The brass fittings are fitted to the hose, so there is no cutting, crimping or brazing on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorbs compressor vibration:\u003c\/strong\u003e The flexible hose copes with movement that can crack rigid copper capillary tube.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack or orange:\u003c\/strong\u003e Use the colour to separate lines on a crowded unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCapillary Hose 1 m Straight x Elbow Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly\u003c\/td\u003e\n\u003ctd\u003e1 m long hose, straight fitting on one end and 90° elbow fitting on the other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd fitting 1\u003c\/td\u003e\n\u003ctd\u003eStraight female brass fitting, 1\/4\" SAE flare (7\/16-20 UNF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd fitting 2\u003c\/td\u003e\n\u003ctd\u003e90° female elbow brass fitting, 1\/4\" SAE flare (7\/16-20 UNF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose\u003c\/td\u003e\n\u003ctd\u003eGOMAX Quadra DN2 flexible thermoplastic capillary hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner \/ outer diameter\u003c\/td\u003e\n\u003ctd\u003e2 mm (0.079 in) \/ 6.1 mm (0.240 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum bend radius\u003c\/td\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking pressure\u003c\/td\u003e\n\u003ctd\u003e120 bar (12 MPa, 1,740 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBurst pressure\u003c\/td\u003e\n\u003ctd\u003e600 bar (60 MPa, 8,700 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-45 °C to +130 °C (-49 °F to +266 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoplastic inner tube (nylon liner), high-tensile polyester braid, laser-branded thermoplastic cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose colour\u003c\/td\u003e\n\u003ctd\u003eBlack (hose 0780BC) or Orange (hose 0780C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRefrigerants and Oils\u003c\/h2\u003e\n\u003cp\u003eThe nylon liner and copper-alloy fittings are chemically compatible with common HFC and HFO refrigerants such as R32, R134a, R404A, R407C, R410A, R454B, R513A and R1234yf, as well as R22, and GOMAX also states compatibility with subcritical CO2 and propane R290. Mineral, PAO, POE and PAG oils are fine. Always check your own system's refrigerant and pressure rating.\u003c\/p\u003e\n\u003ch2\u003eHow to Install an Elbow Capillary Hose\u003c\/h2\u003e\n\u003ch3\u003eDecide which end gets the elbow\u003c\/h3\u003e\n\u003cp\u003ePut the 90° elbow on the port that has the least room around it, such as a gauge or switch port close to a panel. Put the straight end on the port that has clear space in front of it.\u003c\/p\u003e\n\u003ch3\u003eCheck the direction before the final tightening\u003c\/h3\u003e\n\u003cp\u003eOffer the elbow up to its port and check which way the hose will leave. Then tighten the nut. Do not turn or move the hose after it is tight, because that can loosen the nut or damage the seal. If you need a different direction, undo the nut, reposition the hose and tighten it again.\u003c\/p\u003e\n\u003ch3\u003eLeave a gentle curve\u003c\/h3\u003e\n\u003cp\u003eRoute the hose in a smooth curve above the 10 mm minimum bend radius, away from hot surfaces and sharp edges.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGauge and pressure switch ports close to panels or other components\u003c\/li\u003e\n\u003cli\u003eCompact condensing units and rooftop units with limited clearance\u003c\/li\u003e\n\u003cli\u003ePressure test points that face sideways or upward\u003c\/li\u003e\n\u003cli\u003eOil equalisation and oil return lines in tight compressor compartments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy an Elbow Capillary Hose from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of AC and refrigeration components, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eAssembled GOMAX Quadra hose with the manufacturer's hose part numbers, so it matches your parts list.\u003c\/li\u003e\n\u003cli\u003eA straight x straight version as well, if your ports line up and you do not need the elbow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eStraight x Elbow Capillary Hose FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the benefit of the 90° elbow end?\u003c\/h3\u003e\n\u003cp\u003eIt lets the hose leave the port at a right angle, so the hose does not need a tight bend next to the fitting. That helps in cramped spaces.\u003c\/p\u003e\n\u003ch3\u003eHow long is the hose?\u003c\/h3\u003e\n\u003cp\u003eThe assembled hose is 1 m long.\u003c\/p\u003e\n\u003ch3\u003eWhat fittings are on each end?\u003c\/h3\u003e\n\u003cp\u003eOne end has a straight female 1\/4\" SAE flare (7\/16-20 UNF) brass fitting. The other end has a 90° female elbow fitting with the same 1\/4\" SAE flare thread.\u003c\/p\u003e\n\u003ch3\u003eCan I rotate the elbow after it is connected?\u003c\/h3\u003e\n\u003cp\u003eSet the direction while you tighten the nut. To change it later, undo the nut, set the new direction and tighten it again. Do not twist the hose while it is connected.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for R410A and R32 systems?\u003c\/h3\u003e\n\u003cp\u003eThe Quadra hose is chemically compatible with R410A and R32, and its working pressure is 120 bar (1,740 psi). Check that this rating covers your system.\u003c\/p\u003e\n\u003ch3\u003eIs there a version without the elbow?\u003c\/h3\u003e\n\u003cp\u003eYes. The 1 m straight x straight version has a straight fitting on both ends and suits ports that line up.\u003c\/p\u003e","brand":"GOMAX","offers":[{"title":"Black","offer_id":68483999400047,"sku":"HOSE-GOM-DN2-1M-SE-B","price":55.0,"currency_code":"AED","in_stock":true},{"title":"Orange","offer_id":68483999432815,"sku":"HOSE-GOM-DN2-1M-SE-O","price":55.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/gomax-capillary-hose-1m-straight-elbow-orange.jpg?v=1795050823","url":"https:\/\/www.angstromtrading.com\/products\/capillary-hose-1m-straight-elbow-90","provider":"Angstrom Building Materials Trading LLC","version":"1.0","type":"link"}