{"title":"AC \u0026 Refrigeration Tools and Spares","description":"\u003cp\u003e\u003cstrong\u003eThis collection brings together the copper pipe, fittings, spares and hand tools needed for AC and refrigeration installation and service in the UAE.\u003c\/strong\u003e It covers copper coil, elbows and couplings, capillary hoses, compressor oil, filter driers and drier cores, pressure switches, brazing rods and torches, flaring, cutting and bending tools, and manifold gauge sets.\u003c\/p\u003e\n\u003cp\u003eUse it to put together a full job kit for installing a split AC, repairing a refrigeration line or servicing a chiller or cold room. Each product page lists sizes, ratings and compatible refrigerants so you can match the part to the system.\u003c\/p\u003e\n\u003ch3\u003eWhat You Will Find Here\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper pipe and fittings:\u003c\/strong\u003e Copper coil, 90° elbows and couplings for refrigerant lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapillary hoses:\u003c\/strong\u003e 1 m flare hoses for pressure gauges and controls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor oil:\u003c\/strong\u003e Mineral compressor oil for HVAC and refrigeration compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter driers and cores:\u003c\/strong\u003e Flare liquid line filter driers and replaceable drier cores.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure switches:\u003c\/strong\u003e Low, high and dual pressure controls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrazing rods and torches:\u003c\/strong\u003e Phos-copper rods and a self-igniting hosed torch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlaring, cutting and bending tools:\u003c\/strong\u003e A flaring tool, tube cutters and a tube bender kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManifold gauges:\u003c\/strong\u003e A 2-valve gauge set with hoses for charging and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n","products":[{"product_id":"copper-coupling","title":"Krystal Copper Coupling | AC \u0026 Refrigeration Copper Fitting | 1\/2\" to 1-1\/8\"","description":"\u003cp\u003e\u003cstrong\u003eWhat is a copper coupling?\u003c\/strong\u003e It is the straight fitting that joins two lengths of copper pipe of the same size. This Krystal copper coupling UAE range is made of high-grade copper for brazed refrigerant lines in AC and refrigeration systems, and it covers nine pipe sizes from 1\/2\" to 4-1\/8\", each with its own model number.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose the Krystal Copper Coupling?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight, in-line joint:\u003c\/strong\u003e Lets you connect two pipe ends or repair a cut or damaged section of refrigerant line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame material as the pipe:\u003c\/strong\u003e Copper fitting on copper tube, which is what brazed refrigerant pipework is built around.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for brazing:\u003c\/strong\u003e The socket ends take the pipe and are sealed with brazing alloy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNine sizes with model numbers:\u003c\/strong\u003e Easy to match to the pipe on site and to list on a quotation or purchase order.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct: Copper coupling (straight, pipe to pipe)\u003c\/li\u003e\n\u003cli\u003eBrand: Krystal\u003c\/li\u003e\n\u003cli\u003eMaterial: High-grade copper\u003c\/li\u003e\n\u003cli\u003eConnection type: Brazed\u003c\/li\u003e\n\u003cli\u003eSizes: 1\/2\" to 4-1\/8\" (nine sizes, listed in the table below)\u003c\/li\u003e\n\u003cli\u003eModel numbers: KCF1104 to KCF1116, by size\u003c\/li\u003e\n\u003cli\u003eUsed in: HVAC and refrigeration copper piping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCopper Coupling Sizes and Model Numbers\u003c\/h2\u003e\n\u003cp\u003eA coupling is sized by the copper pipe it joins. The pipe outer diameter in millimetres is the standard conversion of the inch size.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize (inch)\u003c\/th\u003e\n\u003cth\u003eCopper pipe OD (mm)\u003c\/th\u003e\n\u003cth\u003eModel no.\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e12.7\u003c\/td\u003e\n\u003ctd\u003eKCF1104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\/8\"\u003c\/td\u003e\n\u003ctd\u003e15.88\u003c\/td\u003e\n\u003ctd\u003eKCF1105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/4\"\u003c\/td\u003e\n\u003ctd\u003e19.05\u003c\/td\u003e\n\u003ctd\u003eKCF1106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\/8\"\u003c\/td\u003e\n\u003ctd\u003e22.22\u003c\/td\u003e\n\u003ctd\u003eKCF1107\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e28.58\u003c\/td\u003e\n\u003ctd\u003eKCF1109\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1-3\/8\"\u003c\/td\u003e\n\u003ctd\u003e34.92\u003c\/td\u003e\n\u003ctd\u003eKCF1110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e53.98\u003c\/td\u003e\n\u003ctd\u003eKCF1112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e79.38\u003c\/td\u003e\n\u003ctd\u003eKCF1114\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e104.78\u003c\/td\u003e\n\u003ctd\u003eKCF1116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to Choose and Install a Copper Coupling\u003c\/h2\u003e\n\u003ch3\u003eMatch the coupling to the pipe\u003c\/h3\u003e\n\u003cp\u003ePick the coupling with the same nominal size as the copper pipe. A 3\/4\" coupling joins 3\/4\" pipe. If you are joining two different pipe sizes, you need a reducing fitting instead of a standard coupling.\u003c\/p\u003e\n\u003ch3\u003ePrepare the joint\u003c\/h3\u003e\n\u003cp\u003eCut the pipe square and remove the burrs inside and out. Clean the pipe end and the inside of the coupling until they are bright, so the brazing alloy can wet the surfaces. Push the pipe fully into the socket so it reaches the stop.\u003c\/p\u003e\n\u003ch3\u003eBraze and check\u003c\/h3\u003e\n\u003cp\u003eHeat the joint evenly and let the brazing alloy flow around the gap. On refrigerant lines it is common practice to purge the pipe with nitrogen while brazing to limit oxide forming inside the tube. Let the joint cool, then pressure and leak test the line as your equipment manufacturer or site procedure requires.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use Copper Couplings: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eResidential split and ductless AC refrigerant lines\u003c\/li\u003e\n\u003cli\u003eCommercial HVAC piping networks\u003c\/li\u003e\n\u003cli\u003eCold rooms, chillers and refrigeration units\u003c\/li\u003e\n\u003cli\u003eIndustrial refrigeration lines\u003c\/li\u003e\n\u003cli\u003eExtending or repairing existing copper pipework\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCopper Coupling Dubai: Why Buy from Angstrom?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of copper coupling UAE jobs and other AC copper fittings, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eKrystal couplings, elbows and copper coil from one supplier, so pipe and fittings match.\u003c\/li\u003e\n\u003cli\u003eModel numbers and sizes listed clearly, so the right coupling goes on the job list the first time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCopper Coupling FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is a copper coupling used for?\u003c\/h3\u003e\n\u003cp\u003eIt joins two pieces of copper pipe in a straight line. In AC and refrigeration systems it connects pipe lengths and repairs damaged sections of refrigerant line.\u003c\/p\u003e\n\u003ch3\u003eHow is a Krystal copper coupling fitted?\u003c\/h3\u003e\n\u003cp\u003eBy brazing. Both pipe ends go into the coupling and the joints are sealed with brazing alloy.\u003c\/p\u003e\n\u003ch3\u003eWhat sizes does the Krystal copper coupling come in?\u003c\/h3\u003e\n\u003cp\u003eThe range covers 1\/2\", 5\/8\", 3\/4\", 7\/8\", 1-1\/8\", 1-3\/8\", 2-1\/8\", 3-1\/8\" and 4-1\/8\". The table above gives the pipe diameter and model number for each.\u003c\/p\u003e\n\u003ch3\u003eAre these refrigeration copper fittings suitable for AC systems?\u003c\/h3\u003e\n\u003cp\u003eYes. They are made for HVAC and refrigeration copper piping, including split AC, commercial HVAC and cold room lines.\u003c\/p\u003e\n\u003ch3\u003eCan I join two different pipe sizes with a coupling?\u003c\/h3\u003e\n\u003cp\u003eNo. A standard coupling joins two pipes of the same size. Joining different sizes needs a reducer or other reducing fitting.\u003c\/p\u003e\n\u003ch3\u003eDo you deliver copper couplings in Dubai and across the UAE?\u003c\/h3\u003e\n\u003cp\u003eYes. We are based in Dubai and deliver across the UAE.\u003c\/p\u003e","brand":"Krystal","offers":[{"title":"1\/2\"","offer_id":68483409805423,"sku":"COUP-KRY-1\/2","price":0.65,"currency_code":"AED","in_stock":true},{"title":"3\/4\"","offer_id":68483409838191,"sku":"COUP-KRY-3\/4","price":1.65,"currency_code":"AED","in_stock":true},{"title":"1-1\/8\"","offer_id":68483409870959,"sku":"COUP-KRY-11\/8","price":4.3,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/krystal-copper-coupling-1-2-inch.jpg?v=1795049886"},{"product_id":"copper-elbow","title":"Krystal Copper Elbow 90° | AC \u0026 Refrigeration Copper Fitting | 3\/8\" to 1-1\/8\"","description":"\u003cp\u003e\u003cstrong\u003eNeed a copper elbow in the UAE?\u003c\/strong\u003e This Krystal 90° copper elbow is one of our AC copper fittings and refrigeration copper fittings, used to turn a copper pipe run through a right angle. It is made of high-grade copper, joins to the pipe by brazing, and comes in 15 sizes from 3\/8\" to 4-1\/8\", so one range covers small split-unit lines and large commercial headers.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose the Krystal Copper Elbow 90°?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-angle turn in one fitting:\u003c\/strong\u003e The 90° bend lets you change direction cleanly around walls, equipment and structure, without bending the pipe by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper to match copper pipe:\u003c\/strong\u003e The fitting is the same metal as the tube, which suits brazed refrigerant lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrazed connection:\u003c\/strong\u003e Made for brazing, the standard way to join copper refrigerant pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne range, many line sizes:\u003c\/strong\u003e Fifteen sizes with model numbers, so you can match the fitting to the pipe you are installing and reorder the exact part later.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct: Copper elbow, 90 degree\u003c\/li\u003e\n\u003cli\u003eBrand: Krystal\u003c\/li\u003e\n\u003cli\u003eMaterial: High-grade copper\u003c\/li\u003e\n\u003cli\u003eAngle: 90°\u003c\/li\u003e\n\u003cli\u003eConnection type: Brazed\u003c\/li\u003e\n\u003cli\u003eSizes: 3\/8\" to 4-1\/8\" (15 sizes, listed in the table below)\u003c\/li\u003e\n\u003cli\u003eModel numbers: KCF0303 to KCF0319, by size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCopper Elbow Sizes and Model Numbers\u003c\/h2\u003e\n\u003cp\u003eEach elbow is sized by the copper pipe it connects to. The pipe outer diameter in millimetres is the standard conversion of the inch size.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize (inch)\u003c\/th\u003e\n\u003cth\u003eCopper pipe OD (mm)\u003c\/th\u003e\n\u003cth\u003eModel no.\u003c\/th\u003e\n\u003cth\u003eAngle\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003ctd\u003e9.52\u003c\/td\u003e\n\u003ctd\u003eKCF0303\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e12.7\u003c\/td\u003e\n\u003ctd\u003eKCF0304\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\/8\"\u003c\/td\u003e\n\u003ctd\u003e15.88\u003c\/td\u003e\n\u003ctd\u003eKCF0305\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/4\"\u003c\/td\u003e\n\u003ctd\u003e19.05\u003c\/td\u003e\n\u003ctd\u003eKCF0306\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\/8\"\u003c\/td\u003e\n\u003ctd\u003e22.22\u003c\/td\u003e\n\u003ctd\u003eKCF0307\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003ctd\u003e25.4\u003c\/td\u003e\n\u003ctd\u003eKCF0308\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e28.58\u003c\/td\u003e\n\u003ctd\u003eKCF0309\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1-1\/4\"\u003c\/td\u003e\n\u003ctd\u003e31.75\u003c\/td\u003e\n\u003ctd\u003eKCF0310\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1-3\/8\"\u003c\/td\u003e\n\u003ctd\u003e34.92\u003c\/td\u003e\n\u003ctd\u003eKCF0311\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1-1\/2\"\u003c\/td\u003e\n\u003ctd\u003e38.1\u003c\/td\u003e\n\u003ctd\u003eKCF0312\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1-5\/8\"\u003c\/td\u003e\n\u003ctd\u003e41.28\u003c\/td\u003e\n\u003ctd\u003eKCF0313\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e44.45\u003c\/td\u003e\n\u003ctd\u003eKCF0314\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e53.98\u003c\/td\u003e\n\u003ctd\u003eKCF0315\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e79.38\u003c\/td\u003e\n\u003ctd\u003eKCF0317\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e104.78\u003c\/td\u003e\n\u003ctd\u003eKCF0319\u003c\/td\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to Choose and Install a Copper Elbow\u003c\/h2\u003e\n\u003ch3\u003eMatch the size to the pipe\u003c\/h3\u003e\n\u003cp\u003eChoose the elbow with the same nominal size as the copper pipe you are joining. A 3\/4\" elbow goes on 3\/4\" pipe, and so on. The size is the pipe diameter, not the fitting's own outside diameter.\u003c\/p\u003e\n\u003ch3\u003eBraze with care\u003c\/h3\u003e\n\u003cp\u003eCut the pipe square, remove burrs, clean the pipe end and the fitting socket, and fit the pipe fully into the socket before heating. Heat the joint evenly and let the brazing alloy flow into the gap. For refrigerant lines, it is common practice to flow nitrogen through the pipe while brazing to limit oxide build-up inside the tube. Follow the equipment manufacturer's installation instructions and your site's procedures.\u003c\/p\u003e\n\u003ch3\u003ePlan the route\u003c\/h3\u003e\n\u003cp\u003eUse as few elbows as the layout allows, because every bend adds some resistance to refrigerant flow. Where the run is long, check the line sizes and any extra fittings against the system designer's requirements.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use 90° Copper Elbows: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eResidential split and ductless AC refrigerant lines\u003c\/li\u003e\n\u003cli\u003eCommercial HVAC and VRF\/VRV piping\u003c\/li\u003e\n\u003cli\u003eRefrigeration units, display chillers and cold rooms\u003c\/li\u003e\n\u003cli\u003eIndustrial refrigeration pipework\u003c\/li\u003e\n\u003cli\u003eRepair and replacement of existing copper refrigerant lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy a Copper Elbow 90 Degree in Dubai from Angstrom?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of copper elbow 90 degree fittings and other HVAC components, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eKrystal copper fittings and Krystal copper coil from one supplier, so pipe and fittings match.\u003c\/li\u003e\n\u003cli\u003eClear model numbers and sizes, which makes it easy to specify the right fitting on a quotation or job list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCopper Elbow FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is a 90 degree copper elbow used for?\u003c\/h3\u003e\n\u003cp\u003eIt changes the direction of a copper pipe run by 90 degrees. In AC and refrigeration systems it routes refrigerant lines around obstacles and into equipment connections.\u003c\/p\u003e\n\u003ch3\u003eHow is the Krystal copper elbow connected to the pipe?\u003c\/h3\u003e\n\u003cp\u003eBy brazing. The pipe slides into the fitting and the joint is sealed with brazing alloy.\u003c\/p\u003e\n\u003ch3\u003eWhat sizes does the Krystal copper elbow 90° come in?\u003c\/h3\u003e\n\u003cp\u003eThe range covers 3\/8\", 1\/2\", 5\/8\", 3\/4\", 7\/8\", 1\", 1-1\/8\", 1-1\/4\", 1-3\/8\", 1-1\/2\", 1-5\/8\", 1-3\/4\", 2-1\/8\", 3-1\/8\" and 4-1\/8\". The table above gives the pipe diameter and model number for each.\u003c\/p\u003e\n\u003ch3\u003eDoes the elbow size refer to the pipe or to the fitting?\u003c\/h3\u003e\n\u003cp\u003eIt refers to the copper pipe the elbow is made for. For example, a 5\/8\" elbow is for 5\/8\" copper pipe.\u003c\/p\u003e\n\u003ch3\u003eCan I use these fittings with Krystal copper coil?\u003c\/h3\u003e\n\u003cp\u003eYes. Choose the elbow in the same nominal size as the coil you are installing, for example a 3\/8\" elbow with 3\/8\" coil.\u003c\/p\u003e\n\u003ch3\u003eDo you deliver copper fittings across the UAE?\u003c\/h3\u003e\n\u003cp\u003eYes. We are based in Dubai and deliver copper elbows and other fittings across the UAE.\u003c\/p\u003e","brand":"Krystal","offers":[{"title":"3\/8\"","offer_id":68483410919535,"sku":"CE-KRY-90-3\/8","price":0.8,"currency_code":"AED","in_stock":true},{"title":"5\/8\"","offer_id":68483410952303,"sku":"CE-KRY-90-5\/8","price":1.65,"currency_code":"AED","in_stock":true},{"title":"3\/4\"","offer_id":68483410985071,"sku":"CE-KRY-90-3\/4","price":2.6,"currency_code":"AED","in_stock":true},{"title":"7\/8\"","offer_id":68483411017839,"sku":"CE-KRY-90-7\/8","price":3.9,"currency_code":"AED","in_stock":true},{"title":"1-1\/8\"","offer_id":68483411050607,"sku":"CE-KRY-90-11\/8","price":6.5,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/krystal-copper-elbow-90-3-8-inch.jpg?v=1795049316"},{"product_id":"copper-coil","title":"Krystal Copper Coil 15m | AC \u0026 Refrigeration Copper Pipe | 1\/4\" to 7\/8\"","description":"\u003cp\u003e\u003cstrong\u003eLooking for copper coil in the UAE?\u003c\/strong\u003e Angstrom, based in Dubai, supplies Krystal copper coil in 15 m lengths for HVAC\/R refrigerant lines. The range runs from 1\/4\" to 7\/8\" in diameter, with wall thicknesses from 0.41 mm to 0.76 mm, so you can match the tube to the refrigerant line and the system pressure.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose Krystal Copper Coil?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-grade copper tube:\u003c\/strong\u003e Krystal coil is made for air conditioning and refrigeration pipework, where tube quality affects how well a system runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-use 15 m coil:\u003c\/strong\u003e A single coil covers long refrigerant runs with fewer joints, and the tube is easy to bend and cut on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide range:\u003c\/strong\u003e Seven diameters, with more than one wall thickness for several of them, so one coil type can cover liquid lines, suction lines and different refrigerants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood for installers and contractors:\u003c\/strong\u003e Suited to split AC installation, service and replacement jobs as well as larger projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct: Copper coil (copper pipe coil) for HVAC\/R refrigerant lines\u003c\/li\u003e\n\u003cli\u003eBrand: Krystal\u003c\/li\u003e\n\u003cli\u003eMaterial: High-grade copper\u003c\/li\u003e\n\u003cli\u003eCoil length: 15 m\u003c\/li\u003e\n\u003cli\u003eDiameters: 1\/4\", 5\/16\", 3\/8\", 1\/2\", 5\/8\", 3\/4\", 7\/8\"\u003c\/li\u003e\n\u003cli\u003eWall thickness: 0.41 mm to 0.76 mm, depending on the diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCopper Coil Sizes and Wall Thickness\u003c\/h2\u003e\n\u003cp\u003eThe table lists each Krystal copper coil size with its wall thickness. The outer diameter in millimetres is the standard conversion of the inch size.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize (inch)\u003c\/th\u003e\n\u003cth\u003eApprox. outer diameter (mm)\u003c\/th\u003e\n\u003cth\u003eWall thickness (mm)\u003c\/th\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003ctd\u003e6.35\u003c\/td\u003e\n\u003ctd\u003e0.41\u003c\/td\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003ctd\u003e6.35\u003c\/td\u003e\n\u003ctd\u003e0.51\u003c\/td\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\/16\"\u003c\/td\u003e\n\u003ctd\u003e7.94\u003c\/td\u003e\n\u003ctd\u003e0.41\u003c\/td\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003ctd\u003e9.52\u003c\/td\u003e\n\u003ctd\u003e0.46\u003c\/td\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003ctd\u003e9.52\u003c\/td\u003e\n\u003ctd\u003e0.56\u003c\/td\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e12.7\u003c\/td\u003e\n\u003ctd\u003e0.51\u003c\/td\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e12.7\u003c\/td\u003e\n\u003ctd\u003e0.61\u003c\/td\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\/8\"\u003c\/td\u003e\n\u003ctd\u003e15.88\u003c\/td\u003e\n\u003ctd\u003e0.56\u003c\/td\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\/8\"\u003c\/td\u003e\n\u003ctd\u003e15.88\u003c\/td\u003e\n\u003ctd\u003e0.66\u003c\/td\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/4\"\u003c\/td\u003e\n\u003ctd\u003e19.05\u003c\/td\u003e\n\u003ctd\u003e0.71\u003c\/td\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\/8\"\u003c\/td\u003e\n\u003ctd\u003e22.22\u003c\/td\u003e\n\u003ctd\u003e0.76\u003c\/td\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to Choose the Right Copper Coil Size and Thickness\u003c\/h2\u003e\n\u003ch3\u003ePick the diameter for the refrigerant line\u003c\/h3\u003e\n\u003cp\u003eIn most systems the liquid line uses a smaller diameter and the suction line uses a larger one, because the returning refrigerant vapour needs more room to flow. Always follow the equipment manufacturer's installation manual or the system designer for the exact sizes. Line length and capacity also affect the choice.\u003c\/p\u003e\n\u003ch3\u003ePick the wall thickness for the pressure\u003c\/h3\u003e\n\u003cp\u003eA thicker wall gives the tube more strength for the same diameter. Systems that run at higher pressures, such as those using R410A, often call for a heavier wall than older refrigerants. Check the pressure rating required by your equipment maker or your engineer before you buy.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use Copper Coil: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eResidential split and ductless AC systems\u003c\/li\u003e\n\u003cli\u003eCommercial HVAC and VRF\/VRV refrigerant piping\u003c\/li\u003e\n\u003cli\u003eRefrigeration units, display chillers and cold rooms\u003c\/li\u003e\n\u003cli\u003eReplacement and repair of existing refrigerant lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy Copper Pipe Coil from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of building materials and HVAC components, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eA full range of Krystal sizes and wall thicknesses from one supplier.\u003c\/li\u003e\n\u003cli\u003eHelp with matching the size and wall thickness to your job, so you choose the right coil the first time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCopper Coil FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is copper coil used for?\u003c\/h3\u003e\n\u003cp\u003eCopper coil, also called AC copper pipe or refrigeration copper tube, carries refrigerant between the indoor and outdoor units of air conditioners, and between the parts of refrigeration systems.\u003c\/p\u003e\n\u003ch3\u003eHow long is each Krystal copper coil?\u003c\/h3\u003e\n\u003cp\u003eEvery coil is 15 m long.\u003c\/p\u003e\n\u003ch3\u003eWhat sizes and wall thicknesses does Krystal copper coil come in?\u003c\/h3\u003e\n\u003cp\u003eKrystal copper coil comes in 1\/4\" (0.41 and 0.51 mm), 5\/16\" (0.41 mm), 3\/8\" (0.46 and 0.56 mm), 1\/2\" (0.51 and 0.61 mm), 5\/8\" (0.56 and 0.66 mm), 3\/4\" (0.71 mm) and 7\/8\" (0.76 mm).\u003c\/p\u003e\n\u003ch3\u003eWhy do some sizes come in two wall thicknesses?\u003c\/h3\u003e\n\u003cp\u003eThe thicker option gives extra wall strength for the same diameter. Which one you need depends on the refrigerant, the working pressure and the equipment manufacturer's requirements.\u003c\/p\u003e\n\u003ch3\u003eWhich copper pipe size should I use for my AC?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the model and capacity of the unit, the line length and the refrigerant. The installation manual of your AC or condensing unit lists the liquid and suction line sizes to use.\u003c\/p\u003e\n\u003ch3\u003eDo you deliver copper coil across the UAE?\u003c\/h3\u003e\n\u003cp\u003eYes. We are based in Dubai and deliver across the UAE.\u003c\/p\u003e","brand":"Krystal","offers":[{"title":"1\/4\"","offer_id":68483411443823,"sku":"COIL-KRY-1\/4","price":75.0,"currency_code":"AED","in_stock":true},{"title":"3\/8\"","offer_id":68483411476591,"sku":"COIL-KRY-3\/8","price":125.0,"currency_code":"AED","in_stock":true},{"title":"1\/2\"","offer_id":68483411509359,"sku":"COIL-KRY-1\/2","price":180.0,"currency_code":"AED","in_stock":true},{"title":"5\/8\"","offer_id":68483411542127,"sku":"COIL-KRY-5\/8","price":290.0,"currency_code":"AED","in_stock":true},{"title":"3\/4\"","offer_id":68483411574895,"sku":"COIL-KRY-3\/4","price":380.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/Krystal_Copper_Coil_Bulk.jpg?v=1795047481"},{"product_id":"capillary-hose-1m-straight","title":"GOMAX Quadra DN2 Capillary Hose 1 m | Straight x Straight 1\/4\" Flare | AC \u0026 Refrigeration","description":"\u003cp\u003e\u003cstrong\u003eNeed a straight, ready-made capillary hose for an AC or refrigeration unit?\u003c\/strong\u003e This is a 1 m GOMAX Quadra DN2 capillary hose, already assembled with a straight 1\/4\" SAE flare (7\/16-20 UNF) female brass fitting on each end. Connect it between two ports that line up, such as a service port and a pressure gauge or pressure switch, with no cutting, crimping or brazing on site.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose the 1 m Straight x Straight Capillary Hose?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to fit:\u003c\/strong\u003e The hose arrives already fitted with its brass flare fittings, so installation is a matter of connecting both ends and tightening the nuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight at both ends:\u003c\/strong\u003e A good match for ports that face the hose run directly, such as a gauge or switch mounted in line with the service port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorbs compressor vibration:\u003c\/strong\u003e The flexible hose copes with movement that can crack rigid copper capillary tube.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack or orange:\u003c\/strong\u003e Pick the colour that helps you tell one line from another on the unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 1\/4\" flare:\u003c\/strong\u003e The female 1\/4\" SAE flare ends suit common refrigeration service and instrument ports.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCapillary Hose 1 m Straight Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly\u003c\/td\u003e\n\u003ctd\u003e1 m long hose with a straight fitting on both ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd fittings\u003c\/td\u003e\n\u003ctd\u003eStraight female brass fitting, 1\/4\" SAE flare (7\/16-20 UNF), both ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose\u003c\/td\u003e\n\u003ctd\u003eGOMAX Quadra DN2 flexible thermoplastic capillary hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner \/ outer diameter\u003c\/td\u003e\n\u003ctd\u003e2 mm (0.079 in) \/ 6.1 mm (0.240 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum bend radius\u003c\/td\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking pressure\u003c\/td\u003e\n\u003ctd\u003e120 bar (12 MPa, 1,740 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBurst pressure\u003c\/td\u003e\n\u003ctd\u003e600 bar (60 MPa, 8,700 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-45 °C to +130 °C (-49 °F to +266 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoplastic inner tube (nylon liner), high-tensile polyester braid, laser-branded thermoplastic cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose colour\u003c\/td\u003e\n\u003ctd\u003eBlack (hose 0780BC) or Orange (hose 0780C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRefrigerants and Oils\u003c\/h2\u003e\n\u003cp\u003eThe nylon liner and copper-alloy fittings of the Quadra system are chemically compatible with common HFC and HFO refrigerants such as R32, R134a, R404A, R407C, R410A, R454B, R513A and R1234yf, as well as R22. GOMAX also states compatibility with subcritical CO2 and propane R290. The hose works with mineral, PAO, POE and PAG oils. Check your system's refrigerant and pressure before you choose a hose.\u003c\/p\u003e\n\u003ch2\u003eHow to Connect It\u003c\/h2\u003e\n\u003ch3\u003eCheck the ports first\u003c\/h3\u003e\n\u003cp\u003eMake sure both ports are 1\/4\" male SAE flare (7\/16-20 UNF) and that they sit roughly in line, so the hose runs straight without a hard kink. If one port faces sideways, the straight x 90° elbow version is usually easier to route.\u003c\/p\u003e\n\u003ch3\u003eTighten without twisting the hose\u003c\/h3\u003e\n\u003cp\u003eSeat each fitting on its port and tighten the nut. Hold the hose still while you tighten, because turning the hose after it is fitted can loosen the nut or damage the seal. Keep the bend radius above 10 mm.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePressure gauge and manometer connections on AC and refrigeration units\u003c\/li\u003e\n\u003cli\u003eHigh, low and oil pressure switch lines\u003c\/li\u003e\n\u003cli\u003ePressure test points and service connections\u003c\/li\u003e\n\u003cli\u003eOil equalisation lines between compressors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of AC and refrigeration components, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eAssembled GOMAX Quadra hose with the manufacturer's hose part numbers, so it matches your parts list.\u003c\/li\u003e\n\u003cli\u003eA straight and a 90° elbow version, so you can pick the one that suits your routing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eStraight Capillary Hose FAQ\u003c\/h2\u003e\n\u003ch3\u003eHow long is this capillary hose?\u003c\/h3\u003e\n\u003cp\u003eThe assembled hose is 1 m long.\u003c\/p\u003e\n\u003ch3\u003eWhat fittings does it have?\u003c\/h3\u003e\n\u003cp\u003eA straight female 1\/4\" SAE flare (7\/16-20 UNF) brass fitting on each end.\u003c\/p\u003e\n\u003ch3\u003eDo I need to crimp or braze anything?\u003c\/h3\u003e\n\u003cp\u003eNo. The fittings are already fitted to the hose. You only connect the ends to your ports.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the black and the orange hose?\u003c\/h3\u003e\n\u003cp\u003eOnly the colour of the cover. Both have the same size, pressure rating and temperature range.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure can it handle?\u003c\/h3\u003e\n\u003cp\u003eThe working pressure of the Quadra DN2 hose is 120 bar (1,740 psi), and the burst pressure is 600 bar (8,700 psi).\u003c\/p\u003e\n\u003ch3\u003eWhen should I choose the straight x elbow version instead?\u003c\/h3\u003e\n\u003cp\u003eChoose the elbow version when a port faces sideways or space is tight, so the hose can leave the fitting at a right angle without bending sharply.\u003c\/p\u003e","brand":"GOMAX","offers":[{"title":"Black","offer_id":68483998449775,"sku":"HOSE-GOM-DN2-1M-SS-B","price":50.0,"currency_code":"AED","in_stock":true},{"title":"Orange","offer_id":68483998482543,"sku":"HOSE-GOM-DN2-1M-SS-O","price":50.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/gomax-capillary-hose-1m-straight-black.jpg?v=1795050829"},{"product_id":"capillary-hose-1m-straight-elbow-90","title":"GOMAX Quadra DN2 Capillary Hose 1 m | Straight x 90° Elbow 1\/4\" Flare | AC \u0026 Refrigeration","description":"\u003cp\u003e\u003cstrong\u003eLooking for a capillary hose that turns a corner?\u003c\/strong\u003e This 1 m GOMAX Quadra DN2 hose comes already assembled with a straight 1\/4\" SAE flare (7\/16-20 UNF) female brass fitting on one end and a 90° elbow fitting on the other. The elbow lets the hose leave a port at a right angle, which helps when a gauge, pressure switch or service port sits close to a panel or another component.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose the 1 m Straight x 90° Elbow Capillary Hose?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-angle exit:\u003c\/strong\u003e The 90° elbow end avoids a sharp bend in the hose right at the fitting, which protects the hose in tight spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight end where you need it:\u003c\/strong\u003e The other end is a standard straight fitting, so one hose covers a port that faces forward and one that faces sideways.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlready assembled:\u003c\/strong\u003e The brass fittings are fitted to the hose, so there is no cutting, crimping or brazing on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorbs compressor vibration:\u003c\/strong\u003e The flexible hose copes with movement that can crack rigid copper capillary tube.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack or orange:\u003c\/strong\u003e Use the colour to separate lines on a crowded unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCapillary Hose 1 m Straight x Elbow Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly\u003c\/td\u003e\n\u003ctd\u003e1 m long hose, straight fitting on one end and 90° elbow fitting on the other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd fitting 1\u003c\/td\u003e\n\u003ctd\u003eStraight female brass fitting, 1\/4\" SAE flare (7\/16-20 UNF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd fitting 2\u003c\/td\u003e\n\u003ctd\u003e90° female elbow brass fitting, 1\/4\" SAE flare (7\/16-20 UNF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose\u003c\/td\u003e\n\u003ctd\u003eGOMAX Quadra DN2 flexible thermoplastic capillary hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner \/ outer diameter\u003c\/td\u003e\n\u003ctd\u003e2 mm (0.079 in) \/ 6.1 mm (0.240 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum bend radius\u003c\/td\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking pressure\u003c\/td\u003e\n\u003ctd\u003e120 bar (12 MPa, 1,740 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBurst pressure\u003c\/td\u003e\n\u003ctd\u003e600 bar (60 MPa, 8,700 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-45 °C to +130 °C (-49 °F to +266 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoplastic inner tube (nylon liner), high-tensile polyester braid, laser-branded thermoplastic cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose colour\u003c\/td\u003e\n\u003ctd\u003eBlack (hose 0780BC) or Orange (hose 0780C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRefrigerants and Oils\u003c\/h2\u003e\n\u003cp\u003eThe nylon liner and copper-alloy fittings are chemically compatible with common HFC and HFO refrigerants such as R32, R134a, R404A, R407C, R410A, R454B, R513A and R1234yf, as well as R22, and GOMAX also states compatibility with subcritical CO2 and propane R290. Mineral, PAO, POE and PAG oils are fine. Always check your own system's refrigerant and pressure rating.\u003c\/p\u003e\n\u003ch2\u003eHow to Install an Elbow Capillary Hose\u003c\/h2\u003e\n\u003ch3\u003eDecide which end gets the elbow\u003c\/h3\u003e\n\u003cp\u003ePut the 90° elbow on the port that has the least room around it, such as a gauge or switch port close to a panel. Put the straight end on the port that has clear space in front of it.\u003c\/p\u003e\n\u003ch3\u003eCheck the direction before the final tightening\u003c\/h3\u003e\n\u003cp\u003eOffer the elbow up to its port and check which way the hose will leave. Then tighten the nut. Do not turn or move the hose after it is tight, because that can loosen the nut or damage the seal. If you need a different direction, undo the nut, reposition the hose and tighten it again.\u003c\/p\u003e\n\u003ch3\u003eLeave a gentle curve\u003c\/h3\u003e\n\u003cp\u003eRoute the hose in a smooth curve above the 10 mm minimum bend radius, away from hot surfaces and sharp edges.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGauge and pressure switch ports close to panels or other components\u003c\/li\u003e\n\u003cli\u003eCompact condensing units and rooftop units with limited clearance\u003c\/li\u003e\n\u003cli\u003ePressure test points that face sideways or upward\u003c\/li\u003e\n\u003cli\u003eOil equalisation and oil return lines in tight compressor compartments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy an Elbow Capillary Hose from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of AC and refrigeration components, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eAssembled GOMAX Quadra hose with the manufacturer's hose part numbers, so it matches your parts list.\u003c\/li\u003e\n\u003cli\u003eA straight x straight version as well, if your ports line up and you do not need the elbow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eStraight x Elbow Capillary Hose FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the benefit of the 90° elbow end?\u003c\/h3\u003e\n\u003cp\u003eIt lets the hose leave the port at a right angle, so the hose does not need a tight bend next to the fitting. That helps in cramped spaces.\u003c\/p\u003e\n\u003ch3\u003eHow long is the hose?\u003c\/h3\u003e\n\u003cp\u003eThe assembled hose is 1 m long.\u003c\/p\u003e\n\u003ch3\u003eWhat fittings are on each end?\u003c\/h3\u003e\n\u003cp\u003eOne end has a straight female 1\/4\" SAE flare (7\/16-20 UNF) brass fitting. The other end has a 90° female elbow fitting with the same 1\/4\" SAE flare thread.\u003c\/p\u003e\n\u003ch3\u003eCan I rotate the elbow after it is connected?\u003c\/h3\u003e\n\u003cp\u003eSet the direction while you tighten the nut. To change it later, undo the nut, set the new direction and tighten it again. Do not twist the hose while it is connected.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for R410A and R32 systems?\u003c\/h3\u003e\n\u003cp\u003eThe Quadra hose is chemically compatible with R410A and R32, and its working pressure is 120 bar (1,740 psi). Check that this rating covers your system.\u003c\/p\u003e\n\u003ch3\u003eIs there a version without the elbow?\u003c\/h3\u003e\n\u003cp\u003eYes. The 1 m straight x straight version has a straight fitting on both ends and suits ports that line up.\u003c\/p\u003e","brand":"GOMAX","offers":[{"title":"Black","offer_id":68483999400047,"sku":"HOSE-GOM-DN2-1M-SE-B","price":55.0,"currency_code":"AED","in_stock":true},{"title":"Orange","offer_id":68483999432815,"sku":"HOSE-GOM-DN2-1M-SE-O","price":55.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/gomax-capillary-hose-1m-straight-elbow-orange.jpg?v=1795050823"},{"product_id":"harbax-refrigeration-compressor-oil-3gs-4gs","title":"HARBAX HVAC \u0026 Refrigeration Compressor Oil | 3GS \u0026 4GS Mineral Oil | 1 Gallon (3.78 L)","description":"\u003cp\u003e\u003cstrong\u003eHARBAX HVAC \u0026amp; Refrigeration Compressor Oil is a mineral compressor oil, made in the UAE and sold in a 1 gallon (3.78 L) can in two viscosity grades: 3GS (32 cSt at 40 °C) and 4GS (46 cSt at 40 °C).\u003c\/strong\u003e Both grades suit reciprocating, rotary and screw compressors, and both are listed for R22, R12, R502, ammonia, isobutane and propane systems. If you service older HCFC or CFC equipment in the UAE, this is the kind of oil those compressors were designed for.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose HARBAX Mineral Compressor Oil?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo grades, one brand:\u003c\/strong\u003e 3GS for lower-viscosity requirements and 4GS for a thicker oil film, so you can match the viscosity your compressor maker specifies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide refrigerant list:\u003c\/strong\u003e The label lists CFC, HCFC, ammonia, isobutane and propane refrigerants, including R22 and R502.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree compressor types:\u003c\/strong\u003e Suitable for reciprocating, rotary and screw compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry oil:\u003c\/strong\u003e Water content is stated at 30 mg\/kg on both grades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold-flow data on the label:\u003c\/strong\u003e Pour point is -36 °C for 3GS and -30 °C for 4GS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the UAE:\u003c\/strong\u003e A local product in a 1 gallon can, handy for workshop and site servicing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHARBAX 3GS and 4GS Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eHARBAX 3GS\u003c\/th\u003e\n\u003cth\u003eHARBAX 4GS\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOil type\u003c\/td\u003e\n\u003ctd\u003eMineral refrigeration compressor oil\u003c\/td\u003e\n\u003ctd\u003eMineral refrigeration compressor oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e1 gallon (3.78 L) can\u003c\/td\u003e\n\u003ctd\u003e1 gallon (3.78 L) can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e0.850 kg\/L at 29.5 °C\u003c\/td\u003e\n\u003ctd\u003e0.855 kg\/L at 29.5 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity at 40 °C\u003c\/td\u003e\n\u003ctd\u003e32 cSt\u003c\/td\u003e\n\u003ctd\u003e46 cSt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity at 100 °C\u003c\/td\u003e\n\u003ctd\u003e5.5 cSt\u003c\/td\u003e\n\u003ctd\u003e7.0 cSt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003e190 °C\u003c\/td\u003e\n\u003ctd\u003e200 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePour point\u003c\/td\u003e\n\u003ctd\u003e-36 °C\u003c\/td\u003e\n\u003ctd\u003e-30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater content\u003c\/td\u003e\n\u003ctd\u003e30 mg\/kg\u003c\/td\u003e\n\u003ctd\u003e30 mg\/kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressor types\u003c\/td\u003e\n\u003ctd\u003eReciprocating, rotary, screw\u003c\/td\u003e\n\u003ctd\u003eReciprocating, rotary, screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMade in UAE\u003c\/td\u003e\n\u003ctd\u003eMade in UAE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatible Refrigerants\u003c\/h2\u003e\n\u003cp\u003eThe refrigerants below are listed on the back label of each can.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRefrigerant group\u003c\/th\u003e\n\u003cth\u003eHARBAX 3GS can\u003c\/th\u003e\n\u003cth\u003eHARBAX 4GS can\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCFC\u003c\/td\u003e\n\u003ctd\u003eR11, R12, R13, R13B1, R113, R114, R500, R502, R503\u003c\/td\u003e\n\u003ctd\u003eR11, R12, R13, R13B1, R113, R114, R500, R502, R503\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHCFC\u003c\/td\u003e\n\u003ctd\u003eR22, R123, R124, R401a, R402a, R402b, R403b, R406a, R408a, R409a\u003c\/td\u003e\n\u003ctd\u003eR22, R123, R124, R401a, R402a, R402b, R403b, R406a, R408a, R409a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther refrigerants\u003c\/td\u003e\n\u003ctd\u003eAmmonia: R717, Isobutane: R500a, Propane: R290\u003c\/td\u003e\n\u003ctd\u003eAmmonia: R717, Isobutane: R600a, Propane: R290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e this is a mineral oil. HFC refrigerants such as R134a, R404A, R407C, R410A and R32 are not on the compatibility list, so do not use this oil in those systems. They normally call for the synthetic oil the compressor maker specifies.\u003c\/p\u003e\n\u003ch2\u003e3GS or 4GS: How to Choose\u003c\/h2\u003e\n\u003ch3\u003eStart with the compressor manufacturer's specification\u003c\/h3\u003e\n\u003cp\u003eLook at the compressor nameplate or manual for the required oil type and viscosity. If it asks for a 32 cSt mineral oil, choose 3GS. If it asks for a 46 cSt mineral oil, choose 4GS.\u003c\/p\u003e\n\u003ch3\u003eThink about operating conditions\u003c\/h3\u003e\n\u003cp\u003e3GS is the thinner oil, with a lower pour point of -36 °C. 4GS is thicker, with a higher flash point of 200 °C. Follow the compressor maker's recommendation rather than switching grades on your own.\u003c\/p\u003e\n\u003ch3\u003eDo not mix oil types\u003c\/h3\u003e\n\u003cp\u003eThe label says not to mix with synthetic or incompatible oils. If a system was last serviced with a different oil type, check before you top up.\u003c\/p\u003e\n\u003ch2\u003eHow to Use It\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFollow the compressor manufacturer's recommended oil charge.\u003c\/li\u003e\n\u003cli\u003eMake sure the system is clean before you add oil.\u003c\/li\u003e\n\u003cli\u003eDo not mix with synthetic or incompatible oils.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place and keep the container sealed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eServicing and topping up older R22 air conditioning and refrigeration systems\u003c\/li\u003e\n\u003cli\u003eCommercial and industrial refrigeration plant\u003c\/li\u003e\n\u003cli\u003eResidential HVAC systems that need mineral oil\u003c\/li\u003e\n\u003cli\u003eReciprocating, rotary and screw compressors\u003c\/li\u003e\n\u003cli\u003eAmmonia, isobutane and propane systems where the compressor maker approves mineral oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy HARBAX Compressor Oil from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of HVAC and refrigeration components, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eBoth grades in the same 1 gallon (3.78 L) can, so it is easy to pick the right one.\u003c\/li\u003e\n\u003cli\u003eTechnical data taken straight from the can label, so what you read here matches what you get.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHARBAX Refrigeration Compressor Oil FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between HARBAX 3GS and 4GS?\u003c\/h3\u003e\n\u003cp\u003eThey are both mineral compressor oils. 3GS has a viscosity of 32 cSt at 40 °C and 4GS has 46 cSt at 40 °C. The 4GS grade also has a higher flash point (200 °C against 190 °C), and 3GS has a lower pour point (-36 °C against -30 °C).\u003c\/p\u003e\n\u003ch3\u003eIs HARBAX compressor oil a mineral or synthetic oil?\u003c\/h3\u003e\n\u003cp\u003eIt is a mineral oil. Do not mix it with synthetic oils such as POE or PAG.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with R134a, R410A or R32?\u003c\/h3\u003e\n\u003cp\u003eNo. HFC refrigerants are not on the label's compatibility list. Use the oil your compressor manufacturer specifies for those systems.\u003c\/p\u003e\n\u003ch3\u003eWhich refrigerants is it compatible with?\u003c\/h3\u003e\n\u003cp\u003eBoth cans list CFC refrigerants (R11, R12, R13, R13B1, R113, R114, R500, R502, R503) and HCFC refrigerants (R22, R123, R124, R401a, R402a, R402b, R403b, R406a, R408a, R409a). Under other refrigerants, the 3GS can lists Ammonia: R717, Isobutane: R500a and Propane: R290. The 4GS can lists Ammonia: R717, Isobutane: R600a and Propane: R290.\u003c\/p\u003e\n\u003ch3\u003eWhich compressors can it be used in?\u003c\/h3\u003e\n\u003cp\u003eReciprocating, rotary and screw compressors.\u003c\/p\u003e\n\u003ch3\u003eHow much oil is in one can?\u003c\/h3\u003e\n\u003cp\u003eEach can holds 1 gallon, which is 3.78 litres.\u003c\/p\u003e\n\u003ch3\u003eHow should I store the oil?\u003c\/h3\u003e\n\u003cp\u003eKeep the can sealed in a cool, dry place.\u003c\/p\u003e","brand":"HARBAX","offers":[{"title":"3GS","offer_id":68484328357999,"sku":"OIL-HARB-3-GS","price":40.0,"currency_code":"AED","in_stock":true},{"title":"4GS","offer_id":68484328390767,"sku":"OIL-HARB-4-GS","price":40.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/harbax-3gs-refrigeration-compressor-oil-1-gallon-front.jpg?v=1795051631"},{"product_id":"harbax-filter-drier-hfd-164f-165f","title":"HARBAX Liquid Line Filter Drier | 1\/2\" \u0026 5\/8\" SAE Flare | HFD-164F, HFD-165F","description":"\u003cp\u003e\u003cstrong\u003eThe HARBAX CleanFlow HFD-164F (1\/2\") and HFD-165F (5\/8\") are liquid line filter drier units with flare connections, rated for 45 bar (667 psig) working pressure.\u003c\/strong\u003e Fitted on the high-pressure liquid line, each one takes moisture, acid and solid particles such as dirt and metal fragments out of the refrigerant before they reach the expansion valve and compressor. The solid core design gives high moisture removal with low pressure drop, and the flare ends let you fit it without brazing.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose a HARBAX CleanFlow Liquid Line Filter Drier?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoves moisture and acid:\u003c\/strong\u003e Helps protect compressors, valves and other internal parts from corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid core design:\u003c\/strong\u003e High moisture removal with low pressure drop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatches solid contaminants:\u003c\/strong\u003e Dirt and metal particles are held back instead of circulating with the refrigerant, which reduces the risk of blockages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlare connections:\u003c\/strong\u003e Service-friendly installation and replacement with no brazing needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in replacement:\u003c\/strong\u003e The label describes it as a reliable drop-in replacement for most aftermarket and OEM systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide refrigerant range:\u003c\/strong\u003e The HARBAX CleanFlow guide lists A1, A2L and A3 refrigerants, from R22 and R410A to R32, R454B, R1234yf, R290 and R600a.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHARBAX HFD-164F and HFD-165F Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eHFD-164F\u003c\/th\u003e\n\u003cth\u003eHFD-165F\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHARBAX CleanFlow\u003c\/td\u003e\n\u003ctd\u003eHARBAX CleanFlow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eLiquid line filter drier unit\u003c\/td\u003e\n\u003ctd\u003eLiquid line filter drier unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel number\u003c\/td\u003e\n\u003ctd\u003eHFD-164F\u003c\/td\u003e\n\u003ctd\u003eHFD-165F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection size\u003c\/td\u003e\n\u003ctd\u003e1\/2\" (inch)\u003c\/td\u003e\n\u003ctd\u003e5\/8\" (inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection type\u003c\/td\u003e\n\u003ctd\u003eFlare (SAE flare)\u003c\/td\u003e\n\u003ctd\u003eFlare (SAE flare)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation position\u003c\/td\u003e\n\u003ctd\u003eLiquid line, high-pressure side\u003c\/td\u003e\n\u003ctd\u003eLiquid line, high-pressure side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore design\u003c\/td\u003e\n\u003ctd\u003eSolid core\u003c\/td\u003e\n\u003ctd\u003eSolid core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking pressure\u003c\/td\u003e\n\u003ctd\u003e45 bar (667 psig)\u003c\/td\u003e\n\u003ctd\u003e45 bar (667 psig)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia temperature (label)\u003c\/td\u003e\n\u003ctd\u003e-40 to 120 °C\u003c\/td\u003e\n\u003ctd\u003e-40 to 120 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eRemoves moisture, acid and solid particles\u003c\/td\u003e\n\u003ctd\u003eRemoves moisture, acid and solid particles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eDrop-in replacement for most aftermarket and OEM systems\u003c\/td\u003e\n\u003ctd\u003eDrop-in replacement for most aftermarket and OEM systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.8 kg\u003c\/td\u003e\n\u003ctd\u003e0.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatible Refrigerants\u003c\/h2\u003e\n\u003cp\u003eThe HARBAX installation guide for the CleanFlow filter drier unit lists these refrigerants.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSafety class\u003c\/th\u003e\n\u003cth\u003eRefrigerants listed in the HARBAX CleanFlow guide\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA1\u003c\/td\u003e\n\u003ctd\u003eR134a, R404A, R407C, R507, R22, R410A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA2L\u003c\/td\u003e\n\u003ctd\u003eR32, R444B, R452B, R454B, R1234yf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA3\u003c\/td\u003e\n\u003ctd\u003eR290, R600a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe same guide gives a temperature range of -40 °C to 70 °C (-40 °F to 160 °F). Check the label on your unit for its own ratings.\u003c\/p\u003e\n\u003ch2\u003eHow to Choose the Right Size\u003c\/h2\u003e\n\u003ch3\u003eMatch the flare connection\u003c\/h3\u003e\n\u003cp\u003eCheck the size of the flare fitting on your liquid line. Choose the 1\/2\" HFD-164F for 1\/2\" flare connections and the 5\/8\" HFD-165F for 5\/8\" flare connections.\u003c\/p\u003e\n\u003ch3\u003eKeep it on the liquid line\u003c\/h3\u003e\n\u003cp\u003eThese driers are made for the liquid line on the high-pressure side of the system, so fit them there and not on the suction line.\u003c\/p\u003e\n\u003ch2\u003eHow to Install a Flare Filter Drier\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep flames away from the body\u003c\/strong\u003e of the filter drier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse two spanners\u003c\/strong\u003e on flare models: hold the body hex with one and turn the flare nut with the other.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFollow the flow arrow:\u003c\/strong\u003e install the drier so it points in the direction of refrigerant flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe installation guide is shown in the product gallery.\u003c\/p\u003e\n\u003ch2\u003eWhen to Replace a Filter Drier\u003c\/h2\u003e\n\u003cp\u003eFit a new drier whenever the system is serviced, after contamination, and after a compressor failure. A drier that has already taken up moisture and acid cannot protect a freshly repaired system.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAir conditioning systems\u003c\/li\u003e\n\u003cli\u003eRefrigeration systems\u003c\/li\u003e\n\u003cli\u003eServicing and repair work after contamination or a compressor change\u003c\/li\u003e\n\u003cli\u003eProtection for compressors and expansion valves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy HARBAX Filter Driers from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of HVAC and refrigeration components, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eClear model numbers (HFD-164F and HFD-165F), so you can match the part you need.\u003c\/li\u003e\n\u003cli\u003eBoth sizes on one page, with the manufacturer's installation guide alongside, so it is easy to pick the correct connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHARBAX CleanFlow Liquid Line Filter Drier FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat does a HARBAX filter drier do?\u003c\/h3\u003e\n\u003cp\u003eIt removes moisture, acids and solid contaminants from the refrigerant to protect the refrigeration or air conditioning system.\u003c\/p\u003e\n\u003ch3\u003eWhere should I install it?\u003c\/h3\u003e\n\u003cp\u003eOn the liquid line, on the high-pressure side of the system, with the flow arrow pointing the way the refrigerant flows.\u003c\/p\u003e\n\u003ch3\u003eWhat connection does it use?\u003c\/h3\u003e\n\u003cp\u003eFlare (SAE flare). The HFD-164F is 1\/2\" and the HFD-165F is 5\/8\".\u003c\/p\u003e\n\u003ch3\u003eWhat is the working pressure?\u003c\/h3\u003e\n\u003cp\u003eThe label shows a working pressure of 45 bar (667 psig).\u003c\/p\u003e\n\u003ch3\u003eWhat temperature range does it cover?\u003c\/h3\u003e\n\u003cp\u003eThe label shows a media temperature of -40 to 120 °C. The HARBAX installation guide gives a temperature range of -40 °C to 70 °C (-40 °F to 160 °F).\u003c\/p\u003e\n\u003ch3\u003eWhich refrigerants can it be used with?\u003c\/h3\u003e\n\u003cp\u003eThe HARBAX guide lists A1 refrigerants (R134a, R404A, R407C, R507, R22, R410A), A2L refrigerants (R32, R444B, R452B, R454B, R1234yf) and A3 refrigerants (R290, R600a).\u003c\/p\u003e\n\u003ch3\u003eHow do I tighten the flare nut?\u003c\/h3\u003e\n\u003cp\u003eUse two spanners. Hold the body hex with one and turn the nut with the other. Keep flames away from the body.\u003c\/p\u003e\n\u003ch3\u003eDo I need to braze it in?\u003c\/h3\u003e\n\u003cp\u003eNo. The flare ends are made for a service-friendly connection without brazing.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for air conditioning as well as refrigeration?\u003c\/h3\u003e\n\u003cp\u003eYes. It is suitable for both HVAC and refrigeration applications.\u003c\/p\u003e\n\u003ch3\u003eWhen should I replace the filter drier?\u003c\/h3\u003e\n\u003cp\u003eDuring system servicing, after contamination, and after a compressor failure.\u003c\/p\u003e","brand":"HARBAX","offers":[{"title":"1\/2\" SAE Flare","offer_id":68484493574255,"sku":"HFD-HARB-164","price":25.0,"currency_code":"AED","in_stock":true},{"title":"5\/8\" SAE Flare","offer_id":68484493607023,"sku":"HFD-HARB-165","price":25.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/harbax-filter-drier-hfd164f-1-2-inch-flare.jpg?v=1795052456"},{"product_id":"harbax-drier-core-d48","title":"HARBAX CleanFlow 48-DC Drier Core | D48 Filter Drier Core for Liquid Line Shells","description":"\u003cp\u003e\u003cstrong\u003eThe HARBAX CleanFlow 48-DC (part number D48) is a universal replacement drier core with a 48 cubic inch desiccant volume, made for shell-type filter driers on HVAC and refrigeration systems.\u003c\/strong\u003e Its blend of molecular sieve and activated alumina gives high moisture and acid removal on liquid line and suction line installations, while keeping pressure drop low. It is a core only (some buyers search for it as a dryer core), so it goes inside a standard shell-type filter drier housing.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose the HARBAX CleanFlow 48-DC Drier Core?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh moisture and acid removal:\u003c\/strong\u003e The core adsorbs the moisture and acid that would otherwise damage the system and shorten component life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48 cubic inch desiccant volume:\u003c\/strong\u003e A large adsorption capacity for moisture and acid contaminants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolecular sieve and activated alumina blend:\u003c\/strong\u003e A high-grade mix for chemical stability and filtration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide system coverage:\u003c\/strong\u003e For commercial, industrial and residential systems, on the liquid line or the suction line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks with common refrigerants and oils:\u003c\/strong\u003e CFC, HCFC and HFC refrigerants, with mineral oil, alkylbenzene and POE lubricants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed tin packing:\u003c\/strong\u003e The core is packed in a tin with a pull-ring lid, and it keeps its adsorption capacity while the tin stays sealed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanFlow design:\u003c\/strong\u003e Keeps refrigerant moving smoothly with low pressure drop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHARBAX CleanFlow 48-DC Drier Core Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHARBAX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eCleanFlow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCleanFlow 48-DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eUniversal replacement filter drier core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesiccant volume\u003c\/td\u003e\n\u003ctd\u003e48 cubic inch (48 cu.in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesiccant blend\u003c\/td\u003e\n\u003ctd\u003eHigh-grade molecular sieve and activated alumina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eHigh moisture and acid removal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eLiquid line and suction line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystems\u003c\/td\u003e\n\u003ctd\u003eCommercial, industrial and residential\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003ctd\u003eStandard shell-type filter drier housings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRefrigerants\u003c\/td\u003e\n\u003ctd\u003eCFC, HCFC and HFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLubricants\u003c\/td\u003e\n\u003ctd\u003eMineral oil, alkylbenzene and POE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow\u003c\/td\u003e\n\u003ctd\u003eLow pressure drop, smooth refrigerant flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003eSealed tin with pull-ring lid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied as\u003c\/td\u003e\n\u003ctd\u003eCore only, housing (shell) sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRefrigerants and Lubricants\u003c\/h2\u003e\n\u003cp\u003eThe 48-DC is made for use with CFC, HCFC and HFC refrigerants. It can be used in systems that run mineral oil, alkylbenzene or POE lubricants. Check your system's refrigerant and oil before you order.\u003c\/p\u003e\n\u003ch2\u003eHow a Replaceable Drier Core Works\u003c\/h2\u003e\n\u003cp\u003eA take-apart filter drier has a shell with a removable cover and a core inside. Refrigerant flows through the core, which holds back moisture and acid. When the core is used up, you open the shell, fit a new core and close it again, instead of cutting out the whole drier.\u003c\/p\u003e\n\u003ch2\u003eSealed Tin and Pull-Ring Lid\u003c\/h2\u003e\n\u003cp\u003eThe core arrives in a sealed tin. While the tin stays sealed, the core keeps its adsorption capacity. Keep it sealed until you are ready to fit it. To open the tin, lift the pull ring, bend it back and pull the lid up.\u003c\/p\u003e\n\u003ch2\u003eWhen to Replace the Drier Core\u003c\/h2\u003e\n\u003cp\u003eReplace the core during major servicing, after contamination, and after a compressor failure. A core that has already taken up moisture and acid cannot protect the system once it is used up.\u003c\/p\u003e\n\u003ch2\u003eCheck Before You Choose\u003c\/h2\u003e\n\u003ch3\u003eThis is a core, not a complete drier\u003c\/h3\u003e\n\u003cp\u003eThe 48-DC only works inside a compatible shell-type filter drier housing. Sealed filter driers, which are replaced as a complete unit, do not take a replaceable core.\u003c\/p\u003e\n\u003ch3\u003eMatch your shell\u003c\/h3\u003e\n\u003cp\u003eCheck that your housing takes a 48 cubic inch core before you order. If you are unsure, check the shell's nameplate or the manufacturer's data.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCommercial, industrial and residential refrigeration and HVAC systems\u003c\/li\u003e\n\u003cli\u003eShell-type filter driers on the liquid line or suction line\u003c\/li\u003e\n\u003cli\u003eService work after contamination or a compressor change\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy the HARBAX Drier Core from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of HVAC and refrigeration components, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eClear model and part numbers (CleanFlow 48-DC, D48), so you can match the core to your shell.\u003c\/li\u003e\n\u003cli\u003eSold as a core only, so you pay for the part you are replacing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHARBAX CleanFlow 48-DC Drier Core FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is a drier core?\u003c\/h3\u003e\n\u003cp\u003eIt is the replaceable insert inside a take-apart filter drier, also called a dryer core. It removes moisture and acid from the refrigerant.\u003c\/p\u003e\n\u003ch3\u003eWhat does the HARBAX CleanFlow 48-DC do?\u003c\/h3\u003e\n\u003cp\u003eIt removes moisture and acids from the refrigerant to protect compressors and system components.\u003c\/p\u003e\n\u003ch3\u003eWhat is the desiccant volume and what is it made of?\u003c\/h3\u003e\n\u003cp\u003eThe desiccant volume is 48 cubic inches. The core is made of a high-grade blend of molecular sieve and activated alumina.\u003c\/p\u003e\n\u003ch3\u003eWhich refrigerants and oils can I use it with?\u003c\/h3\u003e\n\u003cp\u003eIt is made for CFC, HCFC and HFC refrigerants, and for systems with mineral oil, alkylbenzene or POE lubricants.\u003c\/p\u003e\n\u003ch3\u003eCan it go on the suction line as well as the liquid line?\u003c\/h3\u003e\n\u003cp\u003eYes. The label lists liquid line and suction line installations in commercial, industrial and residential systems.\u003c\/p\u003e\n\u003ch3\u003eIs it a replacement core or a complete filter drier?\u003c\/h3\u003e\n\u003cp\u003eIt is a replacement core for use inside a compatible shell-type filter drier. The shell is a separate item.\u003c\/p\u003e\n\u003ch3\u003eCan I use it in a sealed flare filter drier?\u003c\/h3\u003e\n\u003cp\u003eNo. Sealed filter driers do not have a removable core. Replace those as a complete unit.\u003c\/p\u003e\n\u003ch3\u003eHow long does the core keep its capacity in the tin?\u003c\/h3\u003e\n\u003cp\u003eWhile the tin stays sealed, the core keeps its adsorption capacity. Open the tin only when you are ready to fit the core.\u003c\/p\u003e\n\u003ch3\u003eDoes it affect refrigerant flow?\u003c\/h3\u003e\n\u003cp\u003eNo. The CleanFlow design is made for low pressure drop and smooth refrigerant circulation.\u003c\/p\u003e\n\u003ch3\u003eWhen should I replace the drier core?\u003c\/h3\u003e\n\u003cp\u003eDuring major servicing, after contamination, and after a compressor failure.\u003c\/p\u003e","brand":"HARBAX","offers":[{"title":"Default Title","offer_id":68484588798063,"sku":"DC-HARB-D-48","price":25.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/harbax-cleanflow-48-dc-filter-drier-core-front.jpg?v=1795052965"},{"product_id":"harbax-automatic-pressure-switch-low-high-dual","title":"HARBAX Automatic Pressure Switch | Low, High \u0026 Dual | HVAC \u0026 Refrigeration","description":"\u003cp\u003e\u003cstrong\u003eThe HARBAX automatic pressure switch comes in three versions for refrigeration and air conditioning: Low Pressure (HDPS1A), High Pressure (HDPS5A) and Dual Pressure (HDPS15A).\u003c\/strong\u003e The low model covers -0.2 to 7.5 bar, the high model covers 8 to 32 bar, and the dual model puts both a low-side range and a high-side cut-out scale in one housing. Every version has 1\/4\" brass flare connections, a scale you can read through the front window and automatic reset.\u003c\/p\u003e\n\u003ch2\u003eLow, High or Dual: Which HARBAX Pressure Switch Do You Need?\u003c\/h2\u003e\n\u003ch3\u003eLow Pressure (HDPS1A)\u003c\/h3\u003e\n\u003cp\u003eChoose this model to watch the low side of a system. Its range runs from -0.2 to 7.5 bar (-3 to 109 psig), with a differential scale of 0.7 to 4 bar.\u003c\/p\u003e\n\u003ch3\u003eHigh Pressure (HDPS5A)\u003c\/h3\u003e\n\u003cp\u003eChoose this model to watch the high side. Its range runs from 8 to 32 bar (100 to 465 psig), with a differential scale of 2 to 6 bar.\u003c\/p\u003e\n\u003ch3\u003eDual Pressure (HDPS15A)\u003c\/h3\u003e\n\u003cp\u003eChoose this model when one unit should watch both sides. The left window has the low-side range and differential scales, and the right window has the high-side CUT OUT scale from 8 to 32 bar. It has two 1\/4\" flare connections, one for each side.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose a HARBAX Automatic Pressure Switch?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree versions, one family:\u003c\/strong\u003e Pick low, high or dual control for compressors, condensers and other refrigeration equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear window scales:\u003c\/strong\u003e Range and differential are printed in both bar and psi (psig for range), so the setting can be read at a glance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic reset:\u003c\/strong\u003e The switch resets by itself once pressure returns inside the set limits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4\" brass flare connection:\u003c\/strong\u003e Matches the common service-port flare fitting on HVAC and refrigeration lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate range and differential adjustment:\u003c\/strong\u003e Each is set with its own screw, with a lock plate to hold the setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting hardware in the kit photos:\u003c\/strong\u003e A galvanised mounting bracket, a cover plate and screws in a bag are shown with the switches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHARBAX Pressure Switch Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eLow Pressure (HDPS1A)\u003c\/th\u003e\n\u003cth\u003eHigh Pressure (HDPS5A)\u003c\/th\u003e\n\u003cth\u003eDual Pressure (HDPS15A)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHARBAX\u003c\/td\u003e\n\u003ctd\u003eHARBAX\u003c\/td\u003e\n\u003ctd\u003eHARBAX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure sides\u003c\/td\u003e\n\u003ctd\u003eLow side only\u003c\/td\u003e\n\u003ctd\u003eHigh side only\u003c\/td\u003e\n\u003ctd\u003eLow side and high side in one housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustable range\u003c\/td\u003e\n\u003ctd\u003e-0.2 to 7.5 bar (-3 to 109 psig)\u003c\/td\u003e\n\u003ctd\u003e8 to 32 bar (100 to 465 psig)\u003c\/td\u003e\n\u003ctd\u003eLow side: -0.2 to 7.5 bar (-3 to 109 psig)\u003cbr\u003eHigh side cut-out: 8 to 32 bar (100 to 465 psig)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDifferential scale\u003c\/td\u003e\n\u003ctd\u003e0.7 to 4 bar (10 to 55 psi)\u003c\/td\u003e\n\u003ctd\u003e2 to 6 bar (35 to 85 psi)\u003c\/td\u003e\n\u003ctd\u003eLow side: 0.7 to 4 bar (10 to 55 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure connection\u003c\/td\u003e\n\u003ctd\u003eOne 1\/4\" SAE flare, brass\u003c\/td\u003e\n\u003ctd\u003eOne 1\/4\" SAE flare, brass\u003c\/td\u003e\n\u003ctd\u003eTwo 1\/4\" flare, brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFaceplate\u003c\/td\u003e\n\u003ctd\u003eSINGLE PRESSURE SWITCH, CE mark\u003c\/td\u003e\n\u003ctd\u003eSINGLE PRESSURE SWITCH, CE mark\u003c\/td\u003e\n\u003ctd\u003eDUAL PRESSURE SWITCH, CE mark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting parts shown in kit photos\u003c\/td\u003e\n\u003ctd\u003eBracket, cover plate, screws\u003c\/td\u003e\n\u003ctd\u003eBracket, cover plate, screws\u003c\/td\u003e\n\u003ctd\u003eBracket, cover plate, screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe readings above come from the scales printed on each switch.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eManual data (HDPS1 and HDPS5)\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch type\u003c\/td\u003e\n\u003ctd\u003eSPDT changeover switch; terminals 1-2 open as pressure rises\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReset\u003c\/td\u003e\n\u003ctd\u003eAutomatic reset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum working pressure (PS\/MWP)\u003c\/td\u003e\n\u003ctd\u003eHDPS1: 245 psig \/ 17 bar\u003cbr\u003eHDPS5: 510 psig \/ 35 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection thread\u003c\/td\u003e\n\u003ctd\u003e7\/16-20 UNF (1\/4\" SAE flare)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-40 to 65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad rating, AC 240 V\u003c\/td\u003e\n\u003ctd\u003e8 A full load, 48 A locked rotor, 3 A pilot duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad rating, AC 120 V\u003c\/td\u003e\n\u003ctd\u003e16 A full load, 96 A locked rotor, 3 A pilot duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad rating, DC 240 V\u003c\/td\u003e\n\u003ctd\u003e12 W pilot duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating basis\u003c\/td\u003e\n\u003ctd\u003eUL and CE regulations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBellows and base\u003c\/td\u003e\n\u003ctd\u003ePhosphor copper bellows with brass base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003eCopper wire only, terminal tightening torque 20 lb.in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe wiring, load, reset and temperature figures in the second table come from the HARBAX single pressure switch manual, which covers the HDPS1 and HDPS5 models. The dual model has its own faceplate scales, shown in the first table.\u003c\/p\u003e\n\u003ch2\u003eAdjusting Range and Differential\u003c\/h2\u003e\n\u003ch3\u003eSet the range\u003c\/h3\u003e\n\u003cp\u003eThe RANGE scale shows the main pressure setting. Turn the range screw to move the marker along the scale. On the dual model, the high side uses the CUT OUT scale in the right-hand window.\u003c\/p\u003e\n\u003ch3\u003eSet the differential\u003c\/h3\u003e\n\u003cp\u003eThe DIFF scale shows the gap between the pressure where the switch operates and the pressure where it resets. It has its own adjusting screw.\u003c\/p\u003e\n\u003ch3\u003eRemove and refit the lock plate\u003c\/h3\u003e\n\u003cp\u003eTake off the lock plate before changing any setting, and fit it again afterwards so the setting stays put. After setting, confirm the switching points against your system's design pressures with a gauge.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh and low pressure control in refrigeration equipment\u003c\/li\u003e\n\u003cli\u003eAir conditioning and refrigeration systems\u003c\/li\u003e\n\u003cli\u003eCondensing unit and compressor protection\u003c\/li\u003e\n\u003cli\u003eAir pressure control in automation systems\u003c\/li\u003e\n\u003cli\u003eReplacement of an existing 1\/4\" flare pressure switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy HARBAX Pressure Switches from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of HVAC and refrigeration components, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eLow, high and dual models on one page, with the model numbers HDPS1A, HDPS5A and HDPS15A shown clearly.\u003c\/li\u003e\n\u003cli\u003eFull pressure ranges and connection details listed, so you can match the switch to your system before you order.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHARBAX Pressure Switch FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between a low, high and dual pressure switch?\u003c\/h3\u003e\n\u003cp\u003eA low pressure switch watches the low side of the system, a high pressure switch watches the high side, and a dual pressure switch combines both in one housing with two connections.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure ranges do the HARBAX switches cover?\u003c\/h3\u003e\n\u003cp\u003eThe low model covers -0.2 to 7.5 bar (-3 to 109 psig). The high model covers 8 to 32 bar (100 to 465 psig). The dual model has the low-side range plus a high-side cut-out scale of 8 to 32 bar.\u003c\/p\u003e\n\u003ch3\u003eDo these switches reset automatically?\u003c\/h3\u003e\n\u003cp\u003eYes. They are automatic-reset switches, so they reset on their own when pressure returns to the set level.\u003c\/p\u003e\n\u003ch3\u003eWhat is the differential, and how do I set it?\u003c\/h3\u003e\n\u003cp\u003eThe differential is the pressure gap between switching off and switching back on. The low switch offers 0.7 to 4 bar and the high switch offers 2 to 6 bar. Set it with the differential screw after removing the lock plate, then refit the plate.\u003c\/p\u003e\n\u003ch3\u003eWhat connection do they have?\u003c\/h3\u003e\n\u003cp\u003eThe low and high models have one 1\/4\" SAE flare connection (7\/16-20 UNF thread). The dual model has two 1\/4\" flare connections.\u003c\/p\u003e\n\u003ch3\u003eWhich refrigerants and media can I use?\u003c\/h3\u003e\n\u003cp\u003eThe standard models are made for Freon-type refrigerants, air and other non-corrosive media, with phosphor copper bellows and a brass base. Ammonia needs a stainless steel version, so these brass models are not for ammonia systems.\u003c\/p\u003e\n\u003ch3\u003eWhat temperature range and electrical rating apply?\u003c\/h3\u003e\n\u003cp\u003eThe manual gives -40 to 65 °C and a rating of 8 A full load at AC 240 V and 16 A at AC 120 V for the single models. It also lists 3 A pilot duty on AC and 12 W on DC 240 V. Wire with copper only.\u003c\/p\u003e\n\u003ch3\u003eWhat maximum pressure can the single models take?\u003c\/h3\u003e\n\u003cp\u003eThe manual lists 245 psig (17 bar) for HDPS1 and 510 psig (35 bar) for HDPS5.\u003c\/p\u003e","brand":"HARBAX","offers":[{"title":"Low Pressure","offer_id":68485731975279,"sku":"PS-HARB-HDPS-1-A","price":55.0,"currency_code":"AED","in_stock":true},{"title":"High Pressure","offer_id":68485732008047,"sku":"PS-HARB-HDPS-5-A","price":60.0,"currency_code":"AED","in_stock":true},{"title":"Dual Pressure (High\/Low)","offer_id":68485732040815,"sku":"PS-HARB-HDPS-15-A","price":75.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/harbax-dual-pressure-switch-hdps15a-front.jpg?v=1795054246"},{"product_id":"harris-0-phos-copper-brazing-rods-per-tube","title":"Harris 0 (Harris Zero) Phos-Copper Brazing Rods | 0.050 x 1\/8\" Flat | 28-Rod Tube","description":"\u003cp\u003e\u003cstrong\u003eHarris 0 (also written Harris Zero) is a silver-free phos-copper brazing alloy, classified AWS BCuP-2, for joining copper to copper without flux.\u003c\/strong\u003e It is a low-cost choice for manual brazing of copper tube and fittings, and it also brazes brass when you add white brazing flux. The phosphorus in the alloy cleans the copper surface as it melts, so you do not need a separate flux on copper-to-copper joints. This listing is for one tube of 28 flat rods, each 0.050 x 1\/8 in.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose Harris 0 Brazing Rods?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-fluxing on copper:\u003c\/strong\u003e The phosphorus in the alloy does the fluxing, so copper joints can be brazed with no flux applied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-cost alloy:\u003c\/strong\u003e Harris describes it as an economical choice for copper brazing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlows quickly:\u003c\/strong\u003e The alloy runs freely at brazing temperature, so it suits well-fitted joints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles brass too:\u003c\/strong\u003e It is suitable for brass joints, with white brazing flux and careful heat control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for hand brazing:\u003c\/strong\u003e It is intended mainly for manual torch brazing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliant:\u003c\/strong\u003e Meets EU REACH and RoHS requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHarris 0 Phos-Copper Brazing Rod Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eHarris 0 (Harris Zero)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHarris (Harris Products Group)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eHarris 0 phos-copper brazing filler metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRod size\u003c\/td\u003e\n\u003ctd\u003e0.050 x 1\/8 in. flat rod (1.3 x 3.2 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eOne tube of 28 rods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlloy type\u003c\/td\u003e\n\u003ctd\u003ePhos-copper, silver-free (0% silver)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003ePhosphorus 7.1%, copper remainder (about 92.9%), other elements 0.15% in total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolidus\u003c\/td\u003e\n\u003ctd\u003e710 °C (1300 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLiquidus\u003c\/td\u003e\n\u003ctd\u003e793 °C (1460 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrazing temperature range\u003c\/td\u003e\n\u003ctd\u003e730 to 816 °C (1345 to 1500 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClassification\u003c\/td\u003e\n\u003ctd\u003eAWS A5.8 BCuP-2; ASME SFA 5.8 BCuP-2; ISO 17672 CuP 181\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoint clearance\u003c\/td\u003e\n\u003ctd\u003e0.002 to 0.007 in. (0.05 to 0.18 mm); keep the fit close, under 0.005 in. (0.13 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlux\u003c\/td\u003e\n\u003ctd\u003eNone needed for copper-to-copper; use Stay-Silv white brazing flux on brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical use\u003c\/td\u003e\n\u003ctd\u003eCopper-to-copper and brass joints, mainly manual brazing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot for\u003c\/td\u003e\n\u003ctd\u003eSteel and other ferrous base metals; joints exposed to sulfur or sulfur compounds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eEU REACH and RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAlloy, temperature and classification data come from Harris Products Group.\u003c\/p\u003e\n\u003ch2\u003eHarris 0 Tube Details: 0.050 x 1\/8 in. Flat Rods\u003c\/h2\u003e\n\u003cp\u003eEach tube holds 28 flat rods. Harris also lists the same alloy in round and square rods, but this tube is the flat 0.050 x 1\/8 in. size.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTube detail\u003c\/th\u003e\n\u003cth\u003eHarris 0, 0.050 x 1\/8 in. flat\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRod size\u003c\/td\u003e\n\u003ctd\u003e0.050 x 1\/8 in. (1.3 x 3.2 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRod shape\u003c\/td\u003e\n\u003ctd\u003eFlat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRods per tube\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRod length\u003c\/td\u003e\n\u003ctd\u003e20 in. (about 508 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eOne tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHarris part number\u003c\/td\u003e\n\u003ctd\u003e0620F1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to Braze Copper with Harris 0\u003c\/h2\u003e\n\u003ch3\u003eGet a close joint fit\u003c\/h3\u003e\n\u003cp\u003eHarris 0 flows fast, so the gap between the two parts must be small. Aim for a clearance of 0.002 to 0.007 in. (0.05 to 0.18 mm), and keep the fit close, under 0.005 in. (0.13 mm).\u003c\/p\u003e\n\u003ch3\u003eBrazing copper to copper\u003c\/h3\u003e\n\u003cp\u003eClean the joint, heat the parts evenly and touch the rod to the joint. On copper-to-copper joints no flux is needed.\u003c\/p\u003e\n\u003ch3\u003eBrazing brass or copper to brass\u003c\/h3\u003e\n\u003cp\u003eUse Stay-Silv white brazing flux, and take care not to overheat the brass.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCopper-to-copper joint brazing\u003c\/li\u003e\n\u003cli\u003eBrass joint brazing, with flux\u003c\/li\u003e\n\u003cli\u003eManual torch brazing of copper tube and fittings\u003c\/li\u003e\n\u003cli\u003eCopper pipework repairs and assembly where the joint fit is close\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy Harris Brazing Rods from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of HVAC, refrigeration and brazing supplies, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eHarris Products Group brand, sold per tube of 28 rods so you can buy only what you need.\u003c\/li\u003e\n\u003cli\u003eClear alloy data (BCuP-2, melting range and flux advice) to help you choose the right filler metal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHarris 0 Brazing Rod FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is Harris 0?\u003c\/h3\u003e\n\u003cp\u003eHarris 0 is a Harris Products Group phos-copper brazing alloy for joining copper to copper. It is classified AWS A5.8 BCuP-2 and contains no silver.\u003c\/p\u003e\n\u003ch3\u003eIs Harris Zero the same as Harris 0?\u003c\/h3\u003e\n\u003cp\u003eYes. Harris Zero is just another way of writing the name Harris 0.\u003c\/p\u003e\n\u003ch3\u003eDo I need flux with Harris 0?\u003c\/h3\u003e\n\u003cp\u003eNot for copper-to-copper joints, because the phosphorus in the alloy acts as the flux. For brass, or for copper to brass, use Stay-Silv white brazing flux.\u003c\/p\u003e\n\u003ch3\u003eCan I braze copper to brass with Harris 0?\u003c\/h3\u003e\n\u003cp\u003eYes, but apply white brazing flux and avoid overheating the brass.\u003c\/p\u003e\n\u003ch3\u003eCan I use Harris 0 on steel or other ferrous metals?\u003c\/h3\u003e\n\u003cp\u003eNo. Harris recommends against using it on steel or other ferrous base metals.\u003c\/p\u003e\n\u003ch3\u003eHow is Harris 0 different from Stay-Silv 5 and Stay-Silv 15?\u003c\/h3\u003e\n\u003cp\u003eThose Harris alloys are phos-copper-silver grades, the 5% and 15% silver types, while Harris 0 has no silver. Harris 0 is the economical option for well-fitted copper joints.\u003c\/p\u003e\n\u003ch3\u003eCan I use it on AC and refrigeration copper pipe?\u003c\/h3\u003e\n\u003cp\u003eHarris 0 is made for copper-to-copper joints, which is the joint type found in copper tube for AC and refrigeration work. Keep the fit tight and avoid sulfur exposure in service.\u003c\/p\u003e\n\u003ch3\u003eWhere should I not use Harris 0?\u003c\/h3\u003e\n\u003cp\u003eDo not use it where the brazed joint will be exposed to sulfur or sulfur compounds in service, because phosphorus-bearing alloys are not suited to that environment.\u003c\/p\u003e\n\u003ch3\u003eWhat size are the rods, and how many come in a tube?\u003c\/h3\u003e\n\u003cp\u003eEach tube holds 28 flat rods measuring 0.050 x 1\/8 in. (1.3 x 3.2 mm), about 20 in. (508 mm) long.\u003c\/p\u003e\n\u003ch3\u003eWhat does BCuP-2 mean?\u003c\/h3\u003e\n\u003cp\u003eIt is the AWS A5.8 class for this phos-copper filler metal, equal to ISO 17672 CuP 181.\u003c\/p\u003e","brand":"Harris","offers":[{"title":"Default Title","offer_id":68486248169583,"sku":"BR-HAR-0","price":60.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/harris-0-phos-copper-brazing-rods-tube-and-loose-rods.jpg?v=1795055105"},{"product_id":"dszh-ct-526-f-grabber-flaring-tool","title":"DSZH CT-526-F Grabber Flaring Tool | 3\/16\" to 3\/4\" (5-19 mm) | AC \u0026 HVAC","description":"\u003cp\u003e\u003cstrong\u003eThe DSZH CT-526-F is a manual grabber-type flaring tool that makes 45° flares on copper tube from 3\/16\" to 3\/4\" (5 mm to 19 mm) outside diameter.\u003c\/strong\u003e One adjustable clamp holds every size in that range, so you do not need a separate block for each tube. It suits AC installation, refrigeration pipework and service work, where a clean flare gives a tight joint with a flare nut. It has a cone head, an integrated clamping block and a thickened yoke, and it works by hand.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose the DSZH CT-526-F Flaring Tool?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne tool, 3\/16\" to 3\/4\":\u003c\/strong\u003e The adjustable grabber clamp covers the whole inch range without changing parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInch and metric:\u003c\/strong\u003e The card lists 3\/16\" to 3\/4\" and 5 mm to 19 mm, so metric and inch copper tube both work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone flaring head:\u003c\/strong\u003e The cone forms the tube end into a flare for a leak-tight flare connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated clamping block:\u003c\/strong\u003e The clamp and block are built into one piece, which keeps the tube firmly in place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickened yoke:\u003c\/strong\u003e A heavier yoke is made for repeated use on site and in the workshop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarger range than the CT-525-F:\u003c\/strong\u003e The CT-526-F goes up to 3\/4\", where the CT-525-F stops at 5\/8\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDSZH CT-526-F Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDSZH CT-526-F\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDSZH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCT-526-F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool type\u003c\/td\u003e\n\u003ctd\u003eManual grabber-type flaring tool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube outside diameter (inch)\u003c\/td\u003e\n\u003ctd\u003e3\/16\" to 3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube outside diameter (metric)\u003c\/td\u003e\n\u003ctd\u003e5 mm to 19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube material\u003c\/td\u003e\n\u003ctd\u003eCopper tubing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlare angle\u003c\/td\u003e\n\u003ctd\u003e45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube holding\u003c\/td\u003e\n\u003ctd\u003eAdjustable grabber clamp with integrated block, one tool for the whole size range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlaring head\u003c\/td\u003e\n\u003ctd\u003eCone flaring head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eThickened yoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation\u003c\/td\u003e\n\u003ctd\u003eHand-operated, no power needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied\u003c\/td\u003e\n\u003ctd\u003eOne tool on a display card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe size range is printed on the DSZH packaging. The model data comes from the manufacturer's range, and the flare angle from distributors of the tool.\u003c\/p\u003e\n\u003ch2\u003eHow to Make a Good Flare with the CT-526-F\u003c\/h2\u003e\n\u003ch3\u003ePrepare the tube\u003c\/h3\u003e\n\u003cp\u003eCut the copper tube square and remove the burr from the inside and outside of the cut end. Slide the flare nut onto the tube first, with the thread facing the end, because it cannot be added after the flare is made.\u003c\/p\u003e\n\u003ch3\u003eClamp the tube\u003c\/h3\u003e\n\u003cp\u003eOpen the adjustable clamp, place the tube in it and tighten it so the tube cannot slip. Set the end of the tube at the height the flare needs.\u003c\/p\u003e\n\u003ch3\u003eForm the flare\u003c\/h3\u003e\n\u003cp\u003ePut a drop of oil on the cone, fit the yoke over the clamp, centre the cone on the tube and turn the handle to press the flare. Stop when the flare is formed, release the clamp and look for an even, crack-free flare before you tighten the nut.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFlare connections on AC refrigerant lines\u003c\/li\u003e\n\u003cli\u003eRefrigeration copper pipework\u003c\/li\u003e\n\u003cli\u003eCopper tube flaring in HVAC installation and maintenance\u003c\/li\u003e\n\u003cli\u003eWorkshop and site use with inch or metric tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy the DSZH CT-526-F from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of HVAC and refrigeration tools, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eDSZH tool, supplied on the manufacturer's own display card.\u003c\/li\u003e\n\u003cli\u003eOne flaring tool for every common AC and refrigeration copper tube size from 3\/16\" to 3\/4\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDSZH CT-526-F Flaring Tool FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich tube sizes does the CT-526-F cover?\u003c\/h3\u003e\n\u003cp\u003eIt covers 3\/16\" to 3\/4\" and 5 mm to 19 mm outside diameter, as printed on the packaging.\u003c\/p\u003e\n\u003ch3\u003eIs it for inch tube or metric tube?\u003c\/h3\u003e\n\u003cp\u003eBoth. The adjustable clamp holds any diameter in the range, so 3\/16\" (about 4.8 mm) to 3\/4\" (about 19 mm) tube are covered, and metric sizes from 5 mm to 19 mm.\u003c\/p\u003e\n\u003ch3\u003eCan I use it on copper tube?\u003c\/h3\u003e\n\u003cp\u003eYes. DSZH and its distributors describe it for copper tubing, which is the standard tube for AC and refrigeration work.\u003c\/p\u003e\n\u003ch3\u003eDoes it make a 45° SAE flare?\u003c\/h3\u003e\n\u003cp\u003eYes. Distributors list the tool as a 45° flaring tool, which is the flare angle used for standard SAE flare fittings on HVAC and refrigeration lines.\u003c\/p\u003e\n\u003ch3\u003eWhat does grabber type mean?\u003c\/h3\u003e\n\u003cp\u003eA grabber-type tool holds the tube in an adjustable clamp that grips and centres tubes of different sizes, instead of a fixed block with a separate hole for each size.\u003c\/p\u003e\n\u003ch3\u003eIs it an eccentric or a ratchet flaring tool?\u003c\/h3\u003e\n\u003cp\u003eNo. It is a standard cone-and-yoke grabber tool that you turn by hand. DSZH does not list an eccentric cone or a ratchet drive for this model.\u003c\/p\u003e\n\u003ch3\u003eHow do I get a leak-free flare?\u003c\/h3\u003e\n\u003cp\u003eCut the tube square, remove the burr, fit the nut first, clamp the tube firmly, oil the cone and turn the handle steadily. Check that the flare is even and free of cracks.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the CT-525-F and the CT-526-F?\u003c\/h3\u003e\n\u003cp\u003eThe CT-525-F covers 3\/16\" to 5\/8\", and the CT-526-F extends the range to 3\/4\".\u003c\/p\u003e","brand":"DSZH","offers":[{"title":"Default Title","offer_id":68486791987311,"sku":"FLARE-DSZH-526","price":55.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/dszh-ct-526-f-grabber-flaring-tool-handle-left.jpg?v=1795055739"},{"product_id":"dszh-tube-cutter-wk-174-wk-274","title":"DSZH Tube Cutter WK-174 \u0026 WK-274 | 1\/8\" to 1-1\/8\" \u0026 4-30 mm | AC Copper","description":"\u003cp\u003e\u003cstrong\u003eDSZH offers two roller-type tube cutters for AC and refrigeration copper tube: the compact WK-174 for 1\/8\" to 1-1\/8\" tube, and the WK-274 Hi-Duty cutter marked 4 to 30 mm.\u003c\/strong\u003e Both are hand-operated and use an alloy steel blade to give a clean, square cut before flaring, swaging or brazing. Pick the model from the Model option on this page. Each ships as a single tool on a DSZH display card.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose a DSZH Tube Cutter?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo models, one page:\u003c\/strong\u003e Choose the compact WK-174 or the Hi-Duty WK-274 to suit the tube size and the job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy steel blade:\u003c\/strong\u003e Both models use an alloy steel blade made for neat cuts in copper tube.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoller-type design:\u003c\/strong\u003e The rollers support the tube while the blade cuts, which helps keep the cut square.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWK-174 is compact:\u003c\/strong\u003e Its small one-piece body works in tight spaces, with a high-precision feed thread for smooth cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWK-274 is Hi-Duty:\u003c\/strong\u003e It has a streamlined body and a larger knob, and is marked for tube from 4 to 30 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-operated:\u003c\/strong\u003e No power needed, so they suit workshop and site use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDSZH WK-174 and WK-274 Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eWK-174\u003c\/th\u003e\n\u003cth\u003eWK-274 Hi-Duty\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDSZH\u003c\/td\u003e\n\u003ctd\u003eDSZH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eWK-174\u003c\/td\u003e\n\u003ctd\u003eWK-274\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool type\u003c\/td\u003e\n\u003ctd\u003eCompact roller-type manual tube cutter\u003c\/td\u003e\n\u003ctd\u003eHi-Duty roller-type manual tube cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube outside diameter (packaging)\u003c\/td\u003e\n\u003ctd\u003e1\/8\" to 1-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e4 to 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize in the other unit\u003c\/td\u003e\n\u003ctd\u003eAbout 3.2 mm to 28.6 mm\u003c\/td\u003e\n\u003ctd\u003eManufacturer range lists 1\/8\" to 1-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube material\u003c\/td\u003e\n\u003ctd\u003eCopper and aluminium tubing\u003c\/td\u003e\n\u003ctd\u003eCopper and thin-wall stainless steel (SS) tubing, as printed on the card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting blade\u003c\/td\u003e\n\u003ctd\u003eAlloy steel blade\u003c\/td\u003e\n\u003ctd\u003eAlloy steel blade, \"high-quality cutting blade\" on the card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody\u003c\/td\u003e\n\u003ctd\u003eIntegrated one-piece compact body\u003c\/td\u003e\n\u003ctd\u003eStreamlined cutter body with a knurled blue knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed thread\u003c\/td\u003e\n\u003ctd\u003eHigh-precision thread\u003c\/td\u003e\n\u003ctd\u003eScrew feed knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation\u003c\/td\u003e\n\u003ctd\u003eHand-operated, no power needed\u003c\/td\u003e\n\u003ctd\u003eHand-operated, no power needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied\u003c\/td\u003e\n\u003ctd\u003eOne tool on a display card\u003c\/td\u003e\n\u003ctd\u003eOne tool on a display card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eModel, size and blade details come from the DSZH packaging and the manufacturer's range. The metric figures for the WK-174 are converted from its inch sizes.\u003c\/p\u003e\n\u003ch2\u003eWK-174 or WK-274: How to Choose\u003c\/h2\u003e\n\u003ch3\u003eChoose the WK-174 for compact work\u003c\/h3\u003e\n\u003cp\u003ePick the WK-174 for 1\/8\" to 1-1\/8\" copper tube, especially in confined spots such as behind indoor units or in cramped pipe runs. Its small body is easy to turn in tight spaces.\u003c\/p\u003e\n\u003ch3\u003eChoose the WK-274 Hi-Duty for the wider metric range\u003c\/h3\u003e\n\u003cp\u003ePick the WK-274 if you work in millimetres or need the size range printed on its card, 4 to 30 mm. Its card also lists thin-wall stainless steel (SS) tubing alongside copper.\u003c\/p\u003e\n\u003ch3\u003eCheck the tube diameter first\u003c\/h3\u003e\n\u003cp\u003eMeasure the outside diameter of your tube and compare it with the range printed on the card of the model you pick.\u003c\/p\u003e\n\u003ch2\u003eHow to Cut Copper Tube with a DSZH Cutter\u003c\/h2\u003e\n\u003ch3\u003ePosition the tube\u003c\/h3\u003e\n\u003cp\u003eMark the cut, open the cutter and place the tube between the rollers and the blade, with the blade on your mark.\u003c\/p\u003e\n\u003ch3\u003eCut gradually\u003c\/h3\u003e\n\u003cp\u003eTighten the knob until the blade just touches the tube, then turn the cutter around the tube. Tighten a little after each turn and do not force it, as heavy pressure can squash thin tube.\u003c\/p\u003e\n\u003ch3\u003eRemove the burr\u003c\/h3\u003e\n\u003cp\u003eWhen the tube parts, remove the burr from the inside and outside of the cut end before flaring, swaging or brazing.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAC installation and copper pipe cutting\u003c\/li\u003e\n\u003cli\u003eRefrigeration copper pipework\u003c\/li\u003e\n\u003cli\u003eService, repair and replacement work\u003c\/li\u003e\n\u003cli\u003ePreparing tube ends for flaring, swaging and brazing\u003c\/li\u003e\n\u003cli\u003eWorkshop and site use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy DSZH Tube Cutters from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of HVAC and refrigeration tools, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eDSZH brand cutters, supplied on the manufacturer's display card with the size range printed on it.\u003c\/li\u003e\n\u003cli\u003eBoth models on one page, with a size and material comparison, so you can match the cutter to your tube.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDSZH WK-174 and WK-274 Tube Cutter FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the WK-174 and the WK-274?\u003c\/h3\u003e\n\u003cp\u003eThe WK-174 is a compact cutter for 1\/8\" to 1-1\/8\" tube. The WK-274 is the Hi-Duty model, marked for 4 to 30 mm tube, with a streamlined body and a larger knob.\u003c\/p\u003e\n\u003ch3\u003eWhat tube sizes does each cutter handle?\u003c\/h3\u003e\n\u003cp\u003eThe WK-174 is marked 1\/8\" to 1-1\/8\" O.D., which is about 3.2 mm to 28.6 mm. The WK-274 is marked 4 to 30 mm.\u003c\/p\u003e\n\u003ch3\u003eCan I use them on copper tube for AC and refrigeration?\u003c\/h3\u003e\n\u003cp\u003eYes. Copper tube is the main use for both cutters, in AC installation, refrigeration pipework and repairs.\u003c\/p\u003e\n\u003ch3\u003eWhich one cuts stainless steel tube?\u003c\/h3\u003e\n\u003cp\u003eThe WK-274 card lists copper and thin-wall stainless steel (SS) tubing. The WK-174 packaging gives only the size range, so use it for copper and aluminium tube.\u003c\/p\u003e\n\u003ch3\u003eCan the WK-174 cut aluminium tube?\u003c\/h3\u003e\n\u003cp\u003eYes. It is described for copper and aluminium tubing.\u003c\/p\u003e\n\u003ch3\u003eWhat type of cutters are they?\u003c\/h3\u003e\n\u003cp\u003eBoth are manual roller-type cutters with an alloy steel blade. You turn the cutter by hand around the tube.\u003c\/p\u003e\n\u003ch3\u003eHow do I get a square, clean cut?\u003c\/h3\u003e\n\u003cp\u003eKeep the blade on your mark, tighten the knob a little after each turn and turn the cutter around the tube until it parts. Do not over-tighten, and deburr the end afterwards.\u003c\/p\u003e\n\u003ch3\u003eWhich brand are they?\u003c\/h3\u003e\n\u003cp\u003eBoth are DSZH tools, and the DSZH name and model number are printed on each package.\u003c\/p\u003e","brand":"DSZH","offers":[{"title":"WK-174 (1\/8\" to 1-1\/8\" OD)","offer_id":68487034372207,"sku":"CUT-DSZH-174","price":20.0,"currency_code":"AED","in_stock":true},{"title":"WK-274 Hi-Duty Tube Cutter (4-30 mm)","offer_id":68487167967343,"sku":"CUT-DSZH-274","price":25.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/dszh-wk-174-tube-cutter-black-card.jpg?v=1795055944"},{"product_id":"dszh-wk-666-tube-bender-kit","title":"DSZH WK-666 Tube Bender Kit | 90° Ratchet Bender \u0026 Cutter | 1\/4\" to 1\/2\"","description":"\u003cp\u003e\u003cstrong\u003eThe DSZH WK-666 is a ratchet-type tube bender kit for bending small-diameter AC and refrigeration tube from 1\/4\" to 1\/2\" (5 to 12 mm) up to 90°.\u003c\/strong\u003e A mechanical ratchet and an ergonomic lever handle let you make a controlled bend with one hand. The kit includes aluminium bending wheels, a DSZH tube cutter and a blow-mold carry case, so the common small copper sizes are covered in one box.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose the DSZH WK-666 Tube Bender Kit?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical ratchet action:\u003c\/strong\u003e The ratchet builds the bend in steps, so you can bend small tube quickly and with control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers 5 to 12 mm:\u003c\/strong\u003e The case is marked for 1\/4\", 5\/16\", 3\/8\", 1\/2\" and 5, 6, 8, 10, 12 mm O.D. tube.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBends up to 90°:\u003c\/strong\u003e The former carries a 0 to 90° scale, which helps you reach the angle you want.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick positioning and return:\u003c\/strong\u003e Positioning blocks set the tube in place fast, and a quick return button resets the handle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight, durable build:\u003c\/strong\u003e The body and bending wheels are made of aluminium alloy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter included:\u003c\/strong\u003e A DSZH tube cutter in the case lets you cut and bend the tube with one kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarry case:\u003c\/strong\u003e Everything stores in a blue blow-mold case with red latches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDSZH WK-666 Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDSZH WK-666\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDSZH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eWK-666\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool type\u003c\/td\u003e\n\u003ctd\u003eManual ratchet-type tube bender kit (mechanical ratchet, one-hand lever handle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBend angle\u003c\/td\u003e\n\u003ctd\u003eUp to 90°, with a 0-90° scale on the bending former\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube outside diameter (inch)\u003c\/td\u003e\n\u003ctd\u003e1\/4\", 5\/16\", 3\/8\", 1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube outside diameter (metric)\u003c\/td\u003e\n\u003ctd\u003e5 mm, 6 mm, 8 mm, 10 mm, 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBending wheels\u003c\/td\u003e\n\u003ctd\u003eAluminium alloy wheels in several sizes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody\u003c\/td\u003e\n\u003ctd\u003eAluminium alloy body with ergonomic handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePositioning\u003c\/td\u003e\n\u003ctd\u003eQuick tube positioning and quick return button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlso in the kit\u003c\/td\u003e\n\u003ctd\u003eDSZH tube cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarry case\u003c\/td\u003e\n\u003ctd\u003eBlue blow-mold case with red latches, size range printed on the lid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe size range and model come from the DSZH case label. Bend angle, features and materials come from the manufacturer's WK-666 listing and the kit photos.\u003c\/p\u003e\n\u003ch2\u003eWhat Is in the WK-666 Kit?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRatchet-type tube bender with lever handle and 0-90° bending former\u003c\/li\u003e\n\u003cli\u003eAluminium bending wheels in several sizes for the tube diameters on the case label\u003c\/li\u003e\n\u003cli\u003eTube positioning blocks with knurled knobs\u003c\/li\u003e\n\u003cli\u003eDSZH tube cutter\u003c\/li\u003e\n\u003cli\u003eBlue blow-mold carry case with red latches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Choose the Right Tube Size and Wheel\u003c\/h2\u003e\n\u003ch3\u003eMeasure the outside diameter\u003c\/h3\u003e\n\u003cp\u003eCheck the O.D. of your tube. The kit is marked for 1\/4\", 5\/16\", 3\/8\" and 1\/2\", and for 5, 6, 8, 10 and 12 mm tube.\u003c\/p\u003e\n\u003ch3\u003eMatch the wheel to the tube\u003c\/h3\u003e\n\u003cp\u003eFit the bending wheel that matches the tube diameter and set the positioning block against the tube, so the tube sits snugly in the groove.\u003c\/p\u003e\n\u003ch3\u003eUse the right tube\u003c\/h3\u003e\n\u003cp\u003eThe WK-666 is made for small-diameter tube. Use it on soft, annealed copper tube and keep within the sizes on the case label.\u003c\/p\u003e\n\u003ch2\u003eHow to Bend Tube Without Kinking\u003c\/h2\u003e\n\u003ch3\u003eCut and deburr first\u003c\/h3\u003e\n\u003cp\u003eCut the tube square with the cutter and remove the burr, so the tube seats properly in the wheel.\u003c\/p\u003e\n\u003ch3\u003eSeat the tube and bend in steps\u003c\/h3\u003e\n\u003cp\u003ePlace the tube in the wheel groove, lock it with the positioning block and work the handle in steady strokes. The ratchet holds the bend between strokes.\u003c\/p\u003e\n\u003ch3\u003eWatch the angle scale\u003c\/h3\u003e\n\u003cp\u003eFollow the 0-90° scale on the former and stop at your angle. Do not push past 90°, and never force a tube that is not seated in the groove.\u003c\/p\u003e\n\u003ch3\u003eRelease with the return button\u003c\/h3\u003e\n\u003cp\u003ePress the quick return button to reset the handle, then lift the bent tube out.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAC installation and refrigeration copper pipework\u003c\/li\u003e\n\u003cli\u003eBending small-diameter copper tube in tight spaces\u003c\/li\u003e\n\u003cli\u003eService, repair and replacement work\u003c\/li\u003e\n\u003cli\u003eWorkshop and site use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy the DSZH WK-666 from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of HVAC and refrigeration tools, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eDSZH brand kit with the size range printed on the case.\u003c\/li\u003e\n\u003cli\u003eBender, wheels and tube cutter in a single carry case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDSZH WK-666 Tube Bender FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat tube sizes does the WK-666 bend?\u003c\/h3\u003e\n\u003cp\u003eIt is made for 1\/4\", 5\/16\", 3\/8\" and 1\/2\" O.D. tube, and for 5, 6, 8, 10 and 12 mm, as printed on the case label.\u003c\/p\u003e\n\u003ch3\u003eWhat angle can it bend?\u003c\/h3\u003e\n\u003cp\u003eIt bends up to 90°. It is not a 180° bender.\u003c\/p\u003e\n\u003ch3\u003eCan I bend copper tube for AC and refrigeration with it?\u003c\/h3\u003e\n\u003cp\u003eYes. Small-diameter soft copper tube is its main use, in AC installation and refrigeration pipework.\u003c\/p\u003e\n\u003ch3\u003eCan it bend aluminium tube?\u003c\/h3\u003e\n\u003cp\u003eThe case and the manufacturer's listing give the tube sizes but do not list aluminium, so we recommend it for soft copper tube within the marked sizes.\u003c\/p\u003e\n\u003ch3\u003eWhat type of bender is it?\u003c\/h3\u003e\n\u003cp\u003eIt is a manual ratchet-type lever bender. You work the handle by hand and the ratchet builds the bend in steps.\u003c\/p\u003e\n\u003ch3\u003eHow do I bend without kinking the tube?\u003c\/h3\u003e\n\u003cp\u003eUse the wheel that matches the tube diameter, seat the tube fully in the groove, lock it with the positioning block and bend in steady strokes. Stop at the angle you need.\u003c\/p\u003e\n\u003ch3\u003eWhat is in the kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit holds the ratchet bender, aluminium bending wheels, positioning blocks, a DSZH tube cutter and the blow-mold carry case.\u003c\/p\u003e\n\u003ch3\u003eWhich brand is the WK-666?\u003c\/h3\u003e\n\u003cp\u003eIt is a DSZH kit, and the DSZH name, model WK-666 and size range are printed on the case label.\u003c\/p\u003e","brand":"DSZH","offers":[{"title":"Default Title","offer_id":68487409107055,"sku":"BEND-DSZH-666","price":140.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/dszh-wk-666-tube-bender-kit-open-case-bending-wheels-cutter.jpg?v=1795056379"},{"product_id":"self-igniting-hosed-torch-hz-8392","title":"Self-Igniting Hosed Torch HZ-8392 | MAP-Pro Brazing Torch with 4 ft Hose","description":"\u003cp\u003e\u003cstrong\u003eThe Self-Igniting Hosed Torch HZ-8392 is a push-button brazing torch on a 4 ft hose, made for MAP-Pro fuel and AC and refrigeration copper pipe work.\u003c\/strong\u003e It lights with a single press, gives an adjustable high-energy swirl flame and has a stainless steel burner tube. The hose lets you keep the cylinder on your belt using the included clip, so you can reach into awkward spots with only the light torch head in your hand.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose the HZ-8392 Self-Igniting Hosed Torch?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto ignition:\u003c\/strong\u003e Press the ignition button to light the torch. No separate lighter is needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwirl flame:\u003c\/strong\u003e The high-energy swirl flame concentrates heat for brazing and soldering copper pipe and fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flame:\u003c\/strong\u003e Open or close the regulator to set the flame size for the joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 ft hose:\u003c\/strong\u003e The light handle on a flexible hose is easy to position around pipework and in tight spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder clip included:\u003c\/strong\u003e Hook the cylinder on your belt and keep both hands free to move around the job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel burner tube:\u003c\/strong\u003e A durable tube built for repeated brazing work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti flare feature:\u003c\/strong\u003e The box lists an anti flare feature as part of the design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHZ-8392 Hosed Torch Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eSelf-Igniting Hosed Torch HZ-8392\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHZ-8392\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool type\u003c\/td\u003e\n\u003ctd\u003eSelf-igniting hosed hand torch for brazing and soldering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIgnition\u003c\/td\u003e\n\u003ctd\u003eAuto ignition, push-button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel\u003c\/td\u003e\n\u003ctd\u003eFor use with MAP-Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel flame rating on box\u003c\/td\u003e\n\u003ctd\u003e3600°F \/ 1982°C with brazing fuel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose\u003c\/td\u003e\n\u003ctd\u003e4 ft (about 1.2 m) hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinder connection\u003c\/td\u003e\n\u003ctd\u003eScrew-on cylinder valve, marked TYPE B on the box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlame\u003c\/td\u003e\n\u003ctd\u003eHigh-energy swirl flame, adjustable flame control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBurner tube\u003c\/td\u003e\n\u003ctd\u003eStainless steel burner tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther features\u003c\/td\u003e\n\u003ctd\u003eAnti flare feature, portable, cylinder clip included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied\u003c\/td\u003e\n\u003ctd\u003eTorch with hose, regulator valve and cylinder clip; gas cylinder not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMade in Taiwan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDetails come from the printed box. The 3600°F \/ 1982°C figure is the flame-temperature badge for brazing fuel, shown on the box side, and is not a measured temperature of the torch itself.\u003c\/p\u003e\n\u003ch2\u003eHow to Set Up and Light the Torch\u003c\/h2\u003e\n\u003ch3\u003e1. Prepare the valve\u003c\/h3\u003e\n\u003cp\u003eBefore connecting a cylinder, turn the regulator clockwise until it is closed, hand tight only. Do not force it.\u003c\/p\u003e\n\u003ch3\u003e2. Fit the clip and the cylinder\u003c\/h3\u003e\n\u003cp\u003ePut the clip on the valve, then screw the MAP-Pro cylinder clockwise into the valve body until it is hand tight.\u003c\/p\u003e\n\u003ch3\u003e3. Hang it and open the gas\u003c\/h3\u003e\n\u003cp\u003eHang the valve and cylinder on your belt. Turn the regulator counter-clockwise about 1\/2 to 1 turn. You will hear the gas flow.\u003c\/p\u003e\n\u003ch3\u003e4. Ignite\u003c\/h3\u003e\n\u003cp\u003ePress the ignition button to light the flame, then adjust it with the regulator.\u003c\/p\u003e\n\u003ch3\u003e5. Shut down\u003c\/h3\u003e\n\u003cp\u003eTurn the regulator off after use and let the torch cool. Then unscrew the cylinder counter-clockwise and press the ignition button once more to release the gas left in the hose.\u003c\/p\u003e\n\u003ch2\u003eUsage and Safety Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRead the instructions on the box before the first use.\u003c\/li\u003e\n\u003cli\u003eWork in a well-ventilated area and keep a fire extinguisher and water close by.\u003c\/li\u003e\n\u003cli\u003eWork on a firebrick surface, not on wood, ordinary brick or concrete, and shield nearby materials from heat.\u003c\/li\u003e\n\u003cli\u003eWear protective glasses and gloves, and handle hot work with proper tools.\u003c\/li\u003e\n\u003cli\u003eNever point the torch at people or flammable objects, and do not use a leaking or damaged torch.\u003c\/li\u003e\n\u003cli\u003eUse only the fuel named on the box. Do not refill, puncture or burn the cylinder.\u003c\/li\u003e\n\u003cli\u003eStore the torch and the cylinder separately, away from heat and out of the reach of children.\u003c\/li\u003e\n\u003cli\u003eIn cold weather the flame can be smaller and may go out if the torch is tipped upside down. Warm the cylinder to room temperature before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrazing copper pipe in AC and refrigeration installation\u003c\/li\u003e\n\u003cli\u003eSoldering and brazing copper fittings\u003c\/li\u003e\n\u003cli\u003eService, repair and replacement work on site\u003c\/li\u003e\n\u003cli\u003ePlumbing and general heating jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy the HZ-8392 Torch from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of HVAC and refrigeration tools, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eComplete hosed torch set: torch, 4 ft hose, regulator valve and cylinder clip.\u003c\/li\u003e\n\u003cli\u003eBox instructions and safety guidance printed in full for the user.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHZ-8392 Self-Igniting Hosed Torch FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat fuel does the HZ-8392 use?\u003c\/h3\u003e\n\u003cp\u003eThe box says it is for use with MAP-Pro. Use only the fuel named on the box.\u003c\/p\u003e\n\u003ch3\u003eHow long is the hose?\u003c\/h3\u003e\n\u003cp\u003eThe box says 4 ft, which is about 1.2 m.\u003c\/p\u003e\n\u003ch3\u003eIs the gas cylinder included?\u003c\/h3\u003e\n\u003cp\u003eNo. The set contains the torch with hose, the regulator valve and the cylinder clip. The MAP-Pro cylinder is a separate item.\u003c\/p\u003e\n\u003ch3\u003eWhat does TYPE B mean on the box?\u003c\/h3\u003e\n\u003cp\u003eThe box marks the cylinder connection as TYPE B and shows a drawing of a cylinder valve top. The operation steps show the cylinder screwing into the valve body by hand. The box does not print a thread standard, so check that your cylinder valve is the screw-on type shown.\u003c\/p\u003e\n\u003ch3\u003eDoes it light automatically?\u003c\/h3\u003e\n\u003cp\u003eYes. It has auto ignition. Press the ignition button once the regulator is open.\u003c\/p\u003e\n\u003ch3\u003eCan I adjust the flame?\u003c\/h3\u003e\n\u003cp\u003eYes. Turn the regulator to change the flame size. The box lists adjustable flame control and a swirl flame.\u003c\/p\u003e\n\u003ch3\u003eIs it good for brazing AC copper pipe?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a brazing torch for MAP-Pro fuel, made for copper pipe work such as AC and refrigeration lines. The 3600°F \/ 1982°C badge on the box refers to the brazing fuel's flame temperature.\u003c\/p\u003e\n\u003ch3\u003eWhy is my flame smaller in cold weather?\u003c\/h3\u003e\n\u003cp\u003eGas pressure drops in cold weather. Warm the cylinder to room temperature before use, and avoid turning the torch upside down, as the flame may go out.\u003c\/p\u003e\n\u003ch3\u003eWhere is it made?\u003c\/h3\u003e\n\u003cp\u003eThe box says it is made in Taiwan.\u003c\/p\u003e","brand":"JB","offers":[{"title":"Default Title","offer_id":68487721156719,"sku":"BT-JB-8329","price":80.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/self-igniting-hosed-torch-hz-8392-brazing-torch-with-hose-and-regulator.jpg?v=1795056743"},{"product_id":"dszh-wk-c3602s-2-valve-manifold-gauge-set","title":"DSZH WK-C3602S 2-Valve Manifold Gauge Set | R22 R404A R410A R407C | 36\" Hoses","description":"\u003cp\u003e\u003cstrong\u003eThe DSZH WK-C3602S is a 2-valve analog manifold gauge set with three 36\" hoses, made for charging and testing R22, R404A, R410A and R407C AC and refrigeration systems.\u003c\/strong\u003e It has 68 mm low and high pressure gauges, a built-in sight glass, aluminium alloy handwheels and shock-proof gauge boots. The red, yellow and blue hoses are rated 800 psi working and 4000 psi burst, and use 1\/4\" SAE brass fittings, so the set connects to standard service ports.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose the DSZH WK-C3602S Manifold Gauge Set?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits high-pressure refrigerants:\u003c\/strong\u003e The gauge scales and hoses are made for R22, R404A, R410A and R407C, which covers most split AC and refrigeration jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-pressure hoses:\u003c\/strong\u003e Three colour-coded 36\" hoses rated 800 psi working pressure and 4000 psi burst.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSight glass:\u003c\/strong\u003e Watch the refrigerant flow while you charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccurate gauges:\u003c\/strong\u003e The card lists 1.6 grade high-accuracy gauges, with pointer calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShock-proof boots:\u003c\/strong\u003e Rubber boots with a rigid lining protect the gauges on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth handwheels:\u003c\/strong\u003e Upgraded aluminium alloy handwheels with reliability seal pistons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook included:\u003c\/strong\u003e Hang the manifold at the unit while you work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDSZH WK-C3602S Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDSZH WK-C3602S\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDSZH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eWK-C3602S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAnalog 2-valve manifold gauge set with 3 charging hoses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGauges\u003c\/td\u003e\n\u003ctd\u003e68 mm dials, low side (blue) and high side (red)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGauge accuracy\u003c\/td\u003e\n\u003ctd\u003e1.6 grade, as printed on the back card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRefrigerants\u003c\/td\u003e\n\u003ctd\u003eR22, R404A, R410A, R407C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHoses\u003c\/td\u003e\n\u003ctd\u003e3 hoses in red, yellow and blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose length\u003c\/td\u003e\n\u003ctd\u003e36\" (90 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose pressure\u003c\/td\u003e\n\u003ctd\u003e800 psi working pressure, 4000 psi burst pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003e1\/4\" SAE brass fittings, knurled couplers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSight glass\u003c\/td\u003e\n\u003ctd\u003eYes, built in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody and handwheels\u003c\/td\u003e\n\u003ctd\u003eBrass and aluminium body, aluminium alloy handwheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eShock-proof rubber boots on the gauges, with a rigid lining\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther features\u003c\/td\u003e\n\u003ctd\u003eReliability seal pistons, hanging hook, pointer calibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003eBlister card with model selection on the back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe model, features and refrigerant legend come from the DSZH blister card. Hose length, refrigerants and pressure ratings follow the manufacturer's data for the WK-C3602S.\u003c\/p\u003e\n\u003ch2\u003eWhat Is in the Set?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2-valve manifold with low pressure (blue) and high pressure (red) gauges\u003c\/li\u003e\n\u003cli\u003eThree charging hoses: red, yellow and blue, 36\" long, with brass knurled couplers\u003c\/li\u003e\n\u003cli\u003eSight glass and hanging hook\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Choose a Manifold Gauge Set\u003c\/h2\u003e\n\u003ch3\u003eMatch the refrigerant\u003c\/h3\u003e\n\u003cp\u003eCheck that the gauge set covers the refrigerant in your system. This set is made for R22, R404A, R410A and R407C.\u003c\/p\u003e\n\u003ch3\u003eCheck the hose length\u003c\/h3\u003e\n\u003cp\u003eThe WK-C3602S has 36\" (90 cm) hoses. Other models in the DSZH range use longer hoses, so choose the length that suits your jobs.\u003c\/p\u003e\n\u003ch3\u003eCheck the hose rating\u003c\/h3\u003e\n\u003cp\u003eR410A systems run at higher pressure. The hoses here are rated 800 psi working and 4000 psi burst.\u003c\/p\u003e\n\u003ch2\u003eHow to Connect and Use It\u003c\/h2\u003e\n\u003ch3\u003eConnect the hoses\u003c\/h3\u003e\n\u003cp\u003eConnect the blue hose to the low side, the red hose to the high side and the yellow hose to the vacuum pump or refrigerant cylinder. Close both handwheels first.\u003c\/p\u003e\n\u003ch3\u003eRead and charge\u003c\/h3\u003e\n\u003cp\u003eOpen the correct handwheel to read pressure or to let refrigerant flow, and watch the sight glass during charging.\u003c\/p\u003e\n\u003ch3\u003eDisconnect safely\u003c\/h3\u003e\n\u003cp\u003eClose the handwheels before you remove the hoses, and keep the service ports capped after use.\u003c\/p\u003e\n\u003ch2\u003eWhere to Use It: Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAC installation and refrigerant charging\u003c\/li\u003e\n\u003cli\u003ePressure testing and leak checks\u003c\/li\u003e\n\u003cli\u003eRefrigeration servicing and diagnostics\u003c\/li\u003e\n\u003cli\u003eEvacuation with a vacuum pump\u003c\/li\u003e\n\u003cli\u003eField and workshop use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy the DSZH WK-C3602S from Angstrom in Dubai?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDubai-based supplier of HVAC and refrigeration tools, with delivery across the UAE.\u003c\/li\u003e\n\u003cli\u003eManifold, gauges and three hoses supplied in one DSZH blister pack.\u003c\/li\u003e\n\u003cli\u003eRefrigerants, hose length and pressure ratings set out clearly before you buy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDSZH WK-C3602S Manifold Gauge Set FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich refrigerants does the WK-C3602S support?\u003c\/h3\u003e\n\u003cp\u003eIt is made for R22, R404A, R410A and R407C. The back card shows an R-410A scale legend.\u003c\/p\u003e\n\u003ch3\u003eCan I use it on R410A systems?\u003c\/h3\u003e\n\u003cp\u003eYes. The hoses are rated 800 psi working and 4000 psi burst, which suits the higher pressure of R410A.\u003c\/p\u003e\n\u003ch3\u003eHow long are the hoses?\u003c\/h3\u003e\n\u003cp\u003eThey are 36\" (90 cm) long. Longer 60\" and 72\" hose models exist in the DSZH range, but this set has 36\" hoses.\u003c\/p\u003e\n\u003ch3\u003eWhat is the pressure rating of the hoses?\u003c\/h3\u003e\n\u003cp\u003e800 psi working pressure and 4000 psi burst pressure.\u003c\/p\u003e\n\u003ch3\u003eWhat is the sight glass for?\u003c\/h3\u003e\n\u003cp\u003eIt lets you see the refrigerant flowing through the manifold while charging.\u003c\/p\u003e\n\u003ch3\u003eWhat size are the connections?\u003c\/h3\u003e\n\u003cp\u003eThe fittings are 1\/4\" SAE brass, the common size on AC and refrigeration service ports.\u003c\/p\u003e\n\u003ch3\u003eHow big are the gauges?\u003c\/h3\u003e\n\u003cp\u003eThe dials are 68 mm across. The card marks the gauges as 1.6 grade accuracy.\u003c\/p\u003e\n\u003ch3\u003eWhat is in the set?\u003c\/h3\u003e\n\u003cp\u003eThe 2-valve manifold with two gauges and a sight glass, plus three 36\" hoses in red, yellow and blue, and a hanging hook.\u003c\/p\u003e\n\u003ch3\u003eWhich brand is it?\u003c\/h3\u003e\n\u003cp\u003eIt is a DSZH manifold gauge, and the DSZH name is printed on the card.\u003c\/p\u003e","brand":"DSZH","offers":[{"title":"Default Title","offer_id":68487972618351,"sku":"AMG-DSZH-68","price":130.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/files\/dszh-wk-c3602s-2-valve-manifold-gauge-set-blister-card-front.jpg?v=1795057093"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/8194\/9807\/collections\/dszh-wk-c3602s-2-valve-manifold-gauge-set-blister-card-front.jpg?v=1795057559","url":"https:\/\/www.angstromtrading.com\/collections\/ac-refrigeration-tools-spares.oembed","provider":"Angstrom Building Materials Trading LLC","version":"1.0","type":"link"}